Name: Protan BlueProof System - Warm Roof Construction Mechanically Fixed - BP Membrane
Brand: Protan (UK) Ltd
SKU: eggokn3mPPQeed1XeFHdcC

Color

Grey

Finish

Anti-skid

Material

PVC

Guidance for specification option:

Manufactured from polyvinyl chloride (PVC) with a core of polyester reinforcement.

Shape

Rectangle

Guidance for specification option:

Blue Roofs are specifically designed, the rolls are 1 & 2m wide, and lengths can be made to measure/project-specific, or standard rolls 15m long.

Length

Bespoke

Width

1000 mm

2000 mm

Warranty description

15 year

20 year

25 year

Manufacturer guidance

Product only warranty and single point system warranty available, consult Protan for details.

Uniclass

Ss_30_40_30_80 Single layer sheet warm roof covering systemsPrimary

CAWS

J42/10 Warm deck roof covering

J42/110 Warm deck roof covering

Classification data

Lower protection layer

Not applicable.

Guidance for specification option:

There should be no requirement for this layer.

Air and vapour control layer

Type

Protan PE Air Vapour Control Layer.

Guidance for specification option:

Loose laid and held in place by the insulation and membrane.
Side and end laps taped to form an air seal.
0.2 mm thick, 4 m x 35 m.

Protan Self-adhesive Air Vapour Control Layer.

Guidance for specification option:

Bonded to the substrate using the SA ProPimer.
Peel off film backing and stick directly to the primed surface.
0.6 mm thick, 1.080 m x 20 m.

Protan Torch-on Air & Vapour Control Layer.

Guidance for specification option:

Bonded to the substrate using the Bituminous ProPrimer and melted to the primed substrate using a gas torch.
1 m x 10 m.

Manufacturer guidance

Condensation analysis should be carried out in accordance with BS 5250 to determine Air & Vapour Control Layer requirements for each project.

Attachment

Laid loose.

Bitumen primer.

SA synthetic rubber primer

Insulation

Type

EPS.

Guidance for specification option:

Protan F2B fleece is required as a separation layer between EPS insulation and PVC membrane (specify below).

Kingspan polyisocyanurate (PIR) - TR26 foil-faced flat insulation system.

Kingspan polyisocyanurate (PIR) - TT26 foil-faced tapered insulation system.

ROCKWOOL Hardrock, Multi-Fix, Dual Density (DD), stone mineral wool board - Tissue-faced flat insulation system.

ROCKWOOL Hardrock, Multi-Fix, Dual Density (DD), stone mineral wool board - Tissue-faced tapered insulation system.

Manufacturer guidance

Inclusive system warranty available, consult Protan UK.

Attachment

Mechanically fixed.

Guidance for specification option:

R75 telescopic tube washers and Protan UK specified fixings required for the deck type. In accordance with Protan's design requirements.

Manufacturer guidance

Mechanically fixed using Protan approved fasteners.

Separating layer

Not required.

Guidance for specification option:

When using Kingspan PIR (TR26/TT26/TR27/TT27) or ROCKWOOL Hardrock, Multi-Fix, Dual Density (DD), stone mineral wool board.

F2B fleece.

Guidance for specification option:

Required as a separation layer between EPS insulation and PVC membrane.

Manufacturer guidance

Only required between the PVC membrane and EPS insulation.

Waterproof covering

Type

Protan BP Membrane.

Attachment

Mechanically fixed.

Guidance for specification option:

R48-3N Telescopic Tube Washers and Protan UK specified fixings.

Refurbishment project.

Guidance for specification option:

Roof surveys, Fixings pull-out tests, and core samples will be required to determine requirements. Protan UK should be consulted regarding this process.

Manufacturer guidance

Protan UK technical team carries out wind load calculations to determine fixing requirements in accordance with BS EN 1991-1-4-2005 + A1-2010.

Joints

Hot air welded laps.

Guidance for specification option:

1 m wide sheets can be welded using the handheld heat gun.

2 m sheets must be welded using the automatic welding machine with a 40 mm wide nozzle.

Accessories

Not required.

Upper protection layer

Not applicable.

Surface protection

Protan Progrip R Walkway.

Guidance for specification option:

14 mm thick PVC, heavy-duty open grid.
600 mm x 10 m.
Black only.

Protan GT 2.4 mm Walkway.

Guidance for specification option:

2.4 mm thick Protan membrane.
2 m x 10 m.
Available in light or dark grey.

Protan Walkway Tile.

Guidance for specification option:

10 mm thick flexible PVC tile, Heavy-duty fishbone embossed.
610 mm x 760 mm.
Dark grey only.

Manufacturer guidance

Walkways can be added for maintenance or regular access purposes. One or all of the walkways can be utilised to achieve the required level of protection. The type of walkway will be dependant on the intensity of traffic on the roof, e.g. annual roof maintenance, or regular movement of material like compressed gas cylinders in a Hospital.

System accessories

Not required.

Protan Approved "BlueProof" Outlet Restrictor.

Guidance for specification option:

A restrictor is required in conjunction with every Protan ProJual Rain Water Outlet as part of a Blue Roof System.

Protan Approved Fixings.

Guidance for specification option:

Protan UK will specify the required fixings following and wind load calculation.

Protan Approved Mastic.

Protan BP "T-Joint" Patches.

Guidance for specification option:

The T-joint patch is required on every T-joint as a secondary precaution as the roof will be holding water during attenuation.

Protan Cover Strip.

Guidance for specification option:

Required to cover terminations and their fixings e.g. at drip edges, water checks, and internal changes of angle to the structure.

Protan Grip Bar.

Guidance for specification option:

Required at every internal change of angle. To terminate top of upstands where Protan laminated metal has not been used.

Protan Laminated Metal.

Guidance for specification option:

Drip edges, Water Checks, Wall Chases, Insulated Abutments, Weir Outlets, Internal & External angles, 1 m x 2 m Flat Sheets, and custom fabrications available.

Protan Lightning Conductor Clips.

Guidance for specification option:

The membrane pad of the conductor clip is welded directly to the membrane of the finished roof, most commonly at 1 m centres.

Protan Omega Profiles.

Guidance for specification option:

Used to create the visual effect of a metal standing seam roof. The profile is fully welded directly to the finished membrane at the required centres, usually set out to hide the lines of the membrane laps.

Protan Prefabricated D Membrane External Corners.

Guidance for specification option:

All External corners require a patch. Prefabricated details can be utilised to save installation time on-site.

Protan Prefabricated D Membrane Internal Corners.

Guidance for specification option:

All Internal corners require a patch. Prefabricated details can be utilised to save installation time on-site.

Protan Prefabricated Pipe Collars.

Guidance for specification option:

Prefabricated details can be utilised to save installation time on-site.

Protan ProJual Rainwater Outlets.

Guidance for specification option:

Used in conjunction with the BluePoof outlet restrictor and drainage design of the Blue Roof.

Protan Stainless Steel Jubilee Clip.

Guidance for specification option:

Required to terminate the top of a pipe detail, e.g. SVP, Boiler flue, handrail post, steel box sections.

Protan Walkway Membranes.

Guidance for specification option:

There are 3 types of walkway which can be utilised based on the level roof access requirements.

Manufacturer guidance

Only Protan approved products can be used as part of the Protan warranties.

System completion

Manufacturer guidance

For a roofing project to be signed off and approved for a warranty all of the following options are required.

Width

As manufacturer's recommendations.

Guidance for specification option:

The Protan UK technical department must carry out a wind load calculation for every project to provide suitable membrane width requirements.

Manufacturer guidance

Waterproof covering width.

Thickness

1.8 mm.

Weight

≥2.1 kg/m².

Foldability at low temperature (to EN 1107-2)

≤-30°C.

Dimensional stability (to EN 1107-2)

≥-0.5 and ≤0.5%.

Water tightness (to EN 1928)

Pass.

Resistance to tearing (EN 12310-2)

≥450/ 300 N.

Tensile strength (to EN 12311-2)

≥1800/ 1400 N/50 mm.

Elongation at break (to EN 12311-2)

≥15%.

Peel resistance of joints (to EN 12317-2)

≥150 N/50 mm.

Shear resistance of joints (to EN 12317-2)

≥1000 N/50 mm.

Water vapour resistance (to EN ISO 12572)

27 m.

Colour

Dark grey.

Guidance for specification option:

Dark grey only as a standard membrane. Other colour options available with a minimum order of 3000 m².

Country of material origin

Norway

Country of product manufacture

Norway

Material

PVC

Guidance for specification option:

Manufactured from polyvinyl chloride (PVC) with a core of polyester reinforcement.

Recyclability

100% recyclable

Manufacturer guidance

Mechanically fastened membranes and system components can be recycled at the end of life.

Platform

Compatible

Version

Revit

IFC

Classification data
Lower protection layer	Not applicable. Guidance for specification option: There should be no requirement for this layer.
Air and vapour control layer	-
Type	Protan PE Air Vapour Control Layer. Guidance for specification option: Loose laid and held in place by the insulation and membrane. Side and end laps taped to form an air seal. 0.2 mm thick, 4 m x 35 m. Protan Self-adhesive Air Vapour Control Layer. Guidance for specification option: Bonded to the substrate using the SA ProPimer. Peel off film backing and stick directly to the primed surface. 0.6 mm thick, 1.080 m x 20 m. Protan Torch-on Air & Vapour Control Layer. Guidance for specification option: Bonded to the substrate using the Bituminous ProPrimer and melted to the primed substrate using a gas torch. 1 m x 10 m. Manufacturer guidance Condensation analysis should be carried out in accordance with BS 5250 to determine Air & Vapour Control Layer requirements for each project.
Attachment	Laid loose. Bitumen primer. SA synthetic rubber primer
Insulation	-
Type	EPS. Guidance for specification option: Protan F2B fleece is required as a separation layer between EPS insulation and PVC membrane (specify below). Kingspan polyisocyanurate (PIR) - TR26 foil-faced flat insulation system. Kingspan polyisocyanurate (PIR) - TT26 foil-faced tapered insulation system. ROCKWOOL Hardrock, Multi-Fix, Dual Density (DD), stone mineral wool board - Tissue-faced flat insulation system. ROCKWOOL Hardrock, Multi-Fix, Dual Density (DD), stone mineral wool board - Tissue-faced tapered insulation system. Manufacturer guidance Inclusive system warranty available, consult Protan UK.
Attachment	Mechanically fixed. Guidance for specification option: R75 telescopic tube washers and Protan UK specified fixings required for the deck type. In accordance with Protan's design requirements. Manufacturer guidance Mechanically fixed using Protan approved fasteners.
Separating layer	Not required. Guidance for specification option: When using Kingspan PIR (TR26/TT26/TR27/TT27) or ROCKWOOL Hardrock, Multi-Fix, Dual Density (DD), stone mineral wool board. F2B fleece. Guidance for specification option: Required as a separation layer between EPS insulation and PVC membrane. Manufacturer guidance Only required between the PVC membrane and EPS insulation.
Waterproof covering	-
Type	Protan BP Membrane.
Attachment	Mechanically fixed. Guidance for specification option: R48-3N Telescopic Tube Washers and Protan UK specified fixings. Refurbishment project. Guidance for specification option: Roof surveys, Fixings pull-out tests, and core samples will be required to determine requirements. Protan UK should be consulted regarding this process. Manufacturer guidance Protan UK technical team carries out wind load calculations to determine fixing requirements in accordance with BS EN 1991-1-4-2005 + A1-2010.
Joints	Hot air welded laps. Guidance for specification option: 1 m wide sheets can be welded using the handheld heat gun. 2 m sheets must be welded using the automatic welding machine with a 40 mm wide nozzle.
Accessories	Not required.
Upper protection layer	Not applicable.
Surface protection	Protan Progrip R Walkway. Guidance for specification option: 14 mm thick PVC, heavy-duty open grid. 600 mm x 10 m. Black only. Protan GT 2.4 mm Walkway. Guidance for specification option: 2.4 mm thick Protan membrane. 2 m x 10 m. Available in light or dark grey. Protan Walkway Tile. Guidance for specification option: 10 mm thick flexible PVC tile, Heavy-duty fishbone embossed. 610 mm x 760 mm. Dark grey only. Manufacturer guidance Walkways can be added for maintenance or regular access purposes. One or all of the walkways can be utilised to achieve the required level of protection. The type of walkway will be dependant on the intensity of traffic on the roof, e.g. annual roof maintenance, or regular movement of material like compressed gas cylinders in a Hospital.
System accessories	Not required. Protan Approved "BlueProof" Outlet Restrictor. Guidance for specification option: A restrictor is required in conjunction with every Protan ProJual Rain Water Outlet as part of a Blue Roof System. Protan Approved Fixings. Guidance for specification option: Protan UK will specify the required fixings following and wind load calculation. Protan Approved Mastic. Protan BP "T-Joint" Patches. Guidance for specification option: The T-joint patch is required on every T-joint as a secondary precaution as the roof will be holding water during attenuation. Protan Cover Strip. Guidance for specification option: Required to cover terminations and their fixings e.g. at drip edges, water checks, and internal changes of angle to the structure. Protan Grip Bar. Guidance for specification option: Required at every internal change of angle. To terminate top of upstands where Protan laminated metal has not been used. Protan Laminated Metal. Guidance for specification option: Drip edges, Water Checks, Wall Chases, Insulated Abutments, Weir Outlets, Internal & External angles, 1 m x 2 m Flat Sheets, and custom fabrications available. Protan Lightning Conductor Clips. Guidance for specification option: The membrane pad of the conductor clip is welded directly to the membrane of the finished roof, most commonly at 1 m centres. Protan Omega Profiles. Guidance for specification option: Used to create the visual effect of a metal standing seam roof. The profile is fully welded directly to the finished membrane at the required centres, usually set out to hide the lines of the membrane laps. Protan Prefabricated D Membrane External Corners. Guidance for specification option: All External corners require a patch. Prefabricated details can be utilised to save installation time on-site. Protan Prefabricated D Membrane Internal Corners. Guidance for specification option: All Internal corners require a patch. Prefabricated details can be utilised to save installation time on-site. Protan Prefabricated Pipe Collars. Guidance for specification option: Prefabricated details can be utilised to save installation time on-site. Protan ProJual Rainwater Outlets. Guidance for specification option: Used in conjunction with the BluePoof outlet restrictor and drainage design of the Blue Roof. Protan Stainless Steel Jubilee Clip. Guidance for specification option: Required to terminate the top of a pipe detail, e.g. SVP, Boiler flue, handrail post, steel box sections. Protan Walkway Membranes. Guidance for specification option: There are 3 types of walkway which can be utilised based on the level roof access requirements. Manufacturer guidance Only Protan approved products can be used as part of the Protan warranties.
System completion	- Manufacturer guidance For a roofing project to be signed off and approved for a warranty all of the following options are required.
Width	As manufacturer's recommendations. Guidance for specification option: The Protan UK technical department must carry out a wind load calculation for every project to provide suitable membrane width requirements. Manufacturer guidance Waterproof covering width.
Thickness	1.8 mm.
Weight	≥2.1 kg/m².
Foldability at low temperature (to EN 1107-2)	≤-30°C.
Dimensional stability (to EN 1107-2)	≥-0.5 and ≤0.5%.
Water tightness (to EN 1928)	Pass.
Resistance to tearing (EN 12310-2)	≥450/ 300 N.
Tensile strength (to EN 12311-2)	≥1800/ 1400 N/50 mm.
Elongation at break (to EN 12311-2)	≥15%.
Peel resistance of joints (to EN 12317-2)	≥150 N/50 mm.
Shear resistance of joints (to EN 12317-2)	≥1000 N/50 mm.
Water vapour resistance (to EN ISO 12572)	27 m.
Colour	Dark grey. Guidance for specification option: Dark grey only as a standard membrane. Other colour options available with a minimum order of 3000 m².

Protan BlueProof System - Warm Roof Construction Mechanically Fixed - BP Membrane

Application

Description

General information

Color

Finish

Material

Shape

Length

Width

Warranty description

Manufacturer guidance

Uniclass

CAWS

Specification data - Single layer sheet warm roof covering systems

Classification data

Lower protection layer

Air and vapour control layer

Type

Manufacturer guidance

Attachment

Insulation

Type

Manufacturer guidance

Attachment

Manufacturer guidance

Separating layer

Manufacturer guidance

Waterproof covering

Type

Attachment

Manufacturer guidance

Joints

Accessories

Upper protection layer

Surface protection

Manufacturer guidance

System accessories

Manufacturer guidance

System completion

Manufacturer guidance

Width

Manufacturer guidance

Thickness

Weight

Foldability at low temperature (to EN 1107-2)

Dimensional stability (to EN 1107-2)

Water tightness (to EN 1928)

Resistance to tearing (EN 12310-2)

Tensile strength (to EN 12311-2)

Elongation at break (to EN 12311-2)

Peel resistance of joints (to EN 12317-2)

Shear resistance of joints (to EN 12317-2)

Water vapour resistance (to EN ISO 12572)

Colour

Sustainability data

Country of material origin

Country of product manufacture

Material

Recyclability

Manufacturer guidance

BIM objects

Product certifications

Similar products from Protan (UK) Ltd