NBS Source
List your products
Protan UK BlueProof Adhered - BPX membrane - Cold Roof System

Protan UK BlueProof Adhered - BPX membrane - Cold Roof System

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

Protan (UK) Ltd

Adhered PVC single-ply membrane water attenuation blue roofing system for cold roof constructions.

Jump to:
+44 (0)1925 658001 www.protan.co.uk
Application

Can be laid on roofs designed for slopes with a minimum 1:100 towards the outlet. Suitable for new build and refurbishment applications on flat or pitched roofs. Can be used on concrete roof decking, plywood WBP to BS 5268-2 and BS EN 636-3 and roofing Grade OSB to BS EN 300, Grade 3.

Description

Water attenuation blue roofing system for new and existing roofs that includes Protan BPX 1.8 mm thick roofing membranes manufactured from PVC with a core of polyester reinforcement. Installed as exposed roofing, allowing rainwater to accumulate to a predefined maximum level and be stored on the roof for a certain amount of time after rainfall.

Water run-off is gradually permitted into the building's drainage system before entering the drainage network. This avoids water overloading, which can result in flooding.

Features and benefits:

  • Can be laid on roofs designed for slopes with a minimum 1:100 towards the outlet.
  • Embossed surface provides a slip resistant texture.
  • Cost-effective, using the existing roof surface area.
  • Can be used with or without insulation.
  • Additional stabilizers ensure the system is resistant to temperature, UV radiation and atmospheric contamination.
  • Controls water pressure, which helps to reduce floods and flood damage.
  • Can be used on both conventional and external drains.
  • Designed to be fully adhered using a moisture-curing polyurethane adhesive. The adhesive should only be applied when the air temperature is above 5ºC.
  • SINTEF approved.
  • Suitable for new build and refurbishment applications on flat or pitched roofs.
  • Manufactured from pliable PVC reinforced with knitted polyester. The PVC contains stabilizers that provide fire resistance and make the product UV stable and resistant to both high and low temperatures. The membrane remains flexible at low temperatures, during installation and use.

Substrates:

Can be used on the following:

  • Concrete roof decking.
  • Plywood WBP to BS 5268–2 and BS EN 636–3, minimum thickness 18 mm.
  • Roofing Grade OSB to BS EN 300, Grade 3, and minimum thickness 18 mm.

Manufacturer recommends that at least one additional overflow is installed into the parapet for protection.

Application:

Can be laid on roofs designed for slopes with a minimum 1:100 towards the outlet. Suitable for new build and refurbishment applications on flat or pitched roofs. Can be used on concrete roof decking, plywood WBP to BS 5268-2 and BS EN 636-3 and roofing Grade OSB to BS EN 300, Grade 3.

General information
Features

Cost effective, can be used with or without insulation, additional stabilizers ensure the system is resistant to temperature, UV radiation and atmospheric contamination. Controls water pressure, which helps to reduce floods and flood damage and can be used on both conventional and external drains. Designed to be fully adhered using a moisture-curing polyurethane adhesive

Finish

Embossed surface provides an anti-slip surface texture

Material

Manufactured from polyvinyl chloride (PVC) with a core of polyester reinforcement

Size

1.8 mm thickness, 2000 mm width

Uniclass 2015
Ss_30_40_30_78 Single layer sheet cold roof covering systemsPrimary
CAWS

J42/130 Cold deck roof covering

Specification data - Single layer sheet cold roof covering systems
Product Reference

Protan BlueProof Adhered - Cold Roof System

Waterproof covering -
Type

Protan BPX Membrane

Attachment

Fully-adhered

Protan ProBond adhesive required.

As membrane manufacturer's recommendations

Joints

Peel resistance/ shear resistance joints. Joint welding is carried out using hot air

Surface protection

Manufacturer recommends that at least one additional overflow is installed into the parapet for protection

System accessories

None

Protan Approved "BlueProof" Outlet Restrictor

Protan Approved Fixings

Protan Approved Leaf Guard

Protan Approved Mastic

Protan BP "T-Joint" Patches

Protan Cover Strip

Protan Grip Bar

Protan Laminated Metal

Protan Lightning Conductor Clips

Protan Omega Profiles

Protan Prefabricated D Membrane External Corners

Protan Prefabricated D Membrane Internal Corners

Protan Prefabricated D Membrane Pipe Collars

Protan ProJual Rainwater Outlets

Protan Stainless Steel Jubilee Clip

Protan Walkway Membranes

Width

2000 mm

As manufacturer's recommendations

Weight

≥2.1 kg/m² (plus fleece weight)

Foldability at low temperature (to EN 1107-2)

≤−30°C

Dimensional stability (to EN 1107-2)

≥-0.5 and ≤0.5%

Water tightness (to EN 1928)

Pass

Resistance to tearing (EN 12310-2)

≥450/300 N

Tensile strength (to EN 12311-2)

≥1800/1400 N/50mm

Elongation at break (to EN 12311-2)

≥15%

Peel resistance of joints (to EN 12317-2)

≥150 N/50 mm

Shear resistance of joints (to EN 12317-2)

≥1000 N/50 mm

Water vapour resistance (to EN ISO 12572)

27 m

Standard product features

Colour

Dark grey.

Features

Cost effective, can be used with or without insulation, additional stabilizers ensure the system is resistant to temperature, UV radiation and atmospheric contamination. Controls water pressure, which helps to reduce floods and flood damage and can be used on both conventional and external drains. Designed to be fully adhered using a moisture-curing polyurethane adhesive.

Finish

Embossed surface provides an anti-slip surface texture.

Material

Manufactured from polyvinyl chloride (PVC) with a core of polyester reinforcement.

Size

1.8 mm thickness, 2000 mm width.

Third party certifications

Additional certifications:

  • SINTEF: Certificate: 20541 - Technical Approval
Similar products from Protan (UK) Ltd