NBS Source
List your products

Profiles XL Inverted Warm System

Third party certifications:
  • BBA Agrément Certificate

    Certificate type

BMI Icopal

A two-layer, high-performance, SBS-modified bitumen, torch-on flat roofing system.

Jump to:
+44 (0)843 224 7400 www.icopal.co.uk
Application

Suitable for direct application to non-combustible substrates only, such as concrete/ screed, or in overlay situations onto existing asphalt/ built-up roof (BUR) substrates. Specify Profiles T.A. System for combustible substrates such as plywood or OSB – consult manufacturer for details.

Description

Two-layer system incorporating a range of styrene butadiene styrene (SBS)-modified, elastomeric bitumen membranes and accessories.

Profiles Systems incorporate a ‘striped’ pattern. This advanced vapour release technology has been designed to dissipate moisture vapour that may be trapped in the roofing system. When this trapped moisture warms, it can form pressure pockets within the system. Low melt bitumen needs a minimal application of flame to activate its fast adhesive properties.

Components:

  • Waterproofing.
  • Separation layer: Icopal SLP 300.
  • Insulation: Thermazone Hydroshield IVR.
  • Filtration layer: Monarperm 700 Water Reducing Layer.
  • Ballast.

Application:

Suitable for direct application to non-combustible substrates only, such as concrete/ screed, or in overlay situations onto existing asphalt/ built-up roof (BUR) substrates. Specify Profiles T.A. System for combustible substrates such as plywood or OSB – consult manufacturer for details.

General information
Specification data - Reinforced bitumen membrane inverted roof covering systems
Product Reference

Profiles XL Inverted Warm System

Primer

Icopal Siplast Bitumen Primer

Quick-drying primer for torch-applied membranes.

Underlay

Profiles Vent XL

Torch-applied membrane with stripes on underside to provide partial bond.

Profiles XL Sand

Fully bonded torch-applied membrane.

Top layer/ Capsheet -
Type

Profiles XL Sand Capsheet

Torch-applied capsheet.

Flashings and detail work -
Underlay

Icopal T.A. Detailing Underlay

3 mm self-adhesive underlay.

Profiles XL Sand

4 mm torch-applied membrane.

Capsheet -
Type

FireSmart T.A Detailing Capsheet

Self-adhesive capsheet.

Profiles XL Mineral Capsheet

Torch-applied capsheet.

Thermaweld Capsheet

Torch-applied capsheet.

Colour

Blue-grey

Brown

Green

Accessories

None

Icopal GRP Edge Trims

Icopal Lightning Conductor Pads

Icopal Roofgard Cable and Tube Duct

Icopal Roofgard Cowled Telescopic Vent

Icopal Roofgard Outlet

Icopal Roofgard Parapet Outlet

Product Options

Preparation:

Consult Icopal Ltd for details of the preparation and priming of the intended roof structure and substrate, and for details of the requirements for preparation layers, venting layers, nailing layers and taping strips.

System build-up:

Consult Icopal Limited’s technical literature for details and guidance. Icopal Limited is also able to offer a design and specification service, and it is recommended that they are consulted early on in the design process.

Third party certifications
  • 07/4409
Similar products from BMI Icopal