NBS Source

Profiles Solo Roofing System

Verified by manufacturer over a year ago

BMI Group UK Ltd

Single layer reinforced bitumen membrane warm deck roof covering.

Jump to:
+44 (0)1908 015760 Website


Single layer torch-applied system of high performance elastomeric SBS-modified bitumen membrane. The product has special stripes on the underside to provide a partial bond and allow dispersion of trapped vapour. The system is used in conjunction with an underlay and capsheet to form fully bonded details. The product is suitable for both new and refurbished roofs. The Profiles Solo system should be installed by a member of Icopal’s IMA-approved contractor network only.

Elastotherm is a single layer torch-on mineral capsheet manufactured on a strong polyester reinforcement coated on both sides with SBS polymer modified bitumen. The underside is finished with a specially blended bitumen stripe pattern and finished with thermofusible film.

The stripe pattern provides vapour equalization from entrapped moisture in the substrate avoiding blistering. The upper surface is finished with slate granules providing a decorative appearance and UV resistance.

General information


Ss_30_40_30_72 Reinforced bitumen membrane warm roof covering systemsPrimary


J41/115 Single-layer reinforced bitumen membrane warm deck roof covering

J41/135 Single-layer reinforced bitumen membrane cold deck roof covering

Specification data - Reinforced bitumen membrane warm roof covering systems

Product Reference

Profiles Solo Roofing System


Icopal Siplast Bitumen Primer

Quick drying bituminous primer.

Icopal S.A. Primer

Quick drying primer for use with self-adhesive membranes.

Vapour control layer

Not required

Profiles T.A. VCL - Stripes

Heat-activated self-adhesive bituminous vapour control layer.

Profiles Vapour-Vent XL

Torch-applied vapour control layer with stripes on upper surface (for non-combustible substrates).


Thermazone Torch-on

For partially bonded layers.

Top layer/ Capsheet

Profiles Solo single-layer membrane

Torch-applied layer with partial bond strips on underside and mineral finish top.

Flashings and detail work



Profiles XL Sand

Torch applied membrane.

Icopal T.A. Detailing Underlay

Thermically-activated, self-adhesive membrane for combustible details.


Profiles XL Mineral

Torch applied capsheet.

FireSmart T,A. Detailing Capsheet

Thermically-activated capsheet for combustible details.



Icopal Roofgard Lightning Conductor Pads

Icopal Roofgard GRP Edge Trims

Icopal Roofgard Outlet

Icopal Roofgard Parapet Outlet

Icopal Roofgard Cowled Telescopic Vent

Icopal Roofgard Cable and Tube Duct

Product Options


Consult manufacturer for details of the preparation and priming of the intended roof structure and substrate and for details of the requirements for preparation layers, venting layers, nailing layers and taping strips.

System build-up:

Consult manufacturer's technical literature for details and guidance. Icopal Limited is also able to offer a design and specification service and it is recommended that they are consulted early in the design process.

Similar products from BMI Group UK Ltd

FireSmart TorchSafe M.A. Roofing System

Power Elastomeric system

Profiles T.A. Warm Roofing System

Profiles T.A. Warm Roofing System

Profiles XL Warm System

Profiles XL Warm System

Total Torch Warm Deck Roofing System

Total Torch Warm Deck Roofing System

Trade APP