Single layer reinforced bitumen membrane warm deck roof covering.
Single layer torch-applied system of high performance elastomeric SBS-modified bitumen membrane. The product has special stripes on the underside to provide a partial bond and allow dispersion of trapped vapour. The system is used in conjunction with an underlay and capsheet to form fully bonded details. The product is suitable for both new and refurbished roofs. The Profiles Solo system should be installed by a member of Icopal’s IMA-approved contractor network only.
Elastotherm is a single layer torch-on mineral capsheet manufactured on a strong polyester reinforcement coated on both sides with SBS polymer modified bitumen. The underside is finished with a specially blended bitumen stripe pattern and finished with thermofusible film.
The stripe pattern provides vapour equalization from entrapped moisture in the substrate avoiding blistering. The upper surface is finished with slate granules providing a decorative appearance and UV resistance.
J41/115 Single layer reinforced bitumen membrane warm deck roof covering
J41/135 Single layer reinforced bitumen membrane cold deck roof covering
Profiles Solo Roofing System
Icopal Siplast Bitumen Primer
Quick drying bituminous primer.
Icopal S.A. Primer
Quick drying primer for use with self-adhesive membranes.
Vapour control layer
Profiles T.A. VCL - Stripes
Heat-activated self-adhesive bituminous vapour control layer.
Profiles Vapour-Vent XL
Torch-applied vapour control layer with stripes on upper surface (for non-combustible substrates).
For partially bonded layers.
Top layer/ Capsheet
Profiles Solo single-layer membrane
Torch-applied layer with partial bond strips on underside and mineral finish top.
Flashings and detail work
Profiles XL Sand
Torch applied membrane.
Icopal T.A. Detailing Underlay
Thermically-activated, self-adhesive membrane for combustible details.
Profiles XL Mineral
Torch applied capsheet.
FireSmart T,A. Detailing Capsheet
Thermically-activated capsheet for combustible details.
Icopal Roofgard Lightning Conductor Pads
Icopal Roofgard GRP Edge Trims
Icopal Roofgard Outlet
Icopal Roofgard Parapet Outlet
Icopal Roofgard Cowled Telescopic Vent
Icopal Roofgard Cable and Tube Duct
Consult manufacturer for details of the preparation and priming of the intended roof structure and substrate and for details of the requirements for preparation layers, venting layers, nailing layers and taping strips.
Consult manufacturer's technical literature for details and guidance. Icopal Limited is also able to offer a design and specification service and it is recommended that they are consulted early in the design process.