NBS Source
List your products
PreSec – BoardSec – Pre-security/self-boarding Gates

PreSec – BoardSec – Pre-security/self-boarding Gates

Gunnebo UK Ltd

PreSec – BoardSec – Pre-security/self-boarding Gate – designed  for pre-security, self-boarding and lounge access in Airports.

Jump to:
+44 (0)1902 455111 www.gunnebo.co.uk

  • Airports.
  • Seaports.
  • Museums.


Pre-security gate developed for interfacing to the airports passenger flight information system and checking the validity of the passenger entitlement to enter the security area. The PreSec is located prior to the security before the traveller enters the security screening area.

The interface is equipped with a 10.1" liquid crystal display (LCD) that can be mounted in different positions. Passage transit is controlled by a dense sensor array that provides reliable detection of fraud attempts and confirmation of passenger transit into the secure area.

The gate can be upgraded with a passport/ document reader and biometric capture devices which, when linked to the boarding pass verification, provides greater security.

Features and benefits:

  • Ergonomic and elegant design.
  • Suitable for high traffic areas.
  • Reduces staffing costs.
  • Small footprint of 165 mm, making it suitable for use in areas with reduced space.
  • Fail-lock and fail-safe options available.
  • Torque-controlled breakthrough option available.
  • Advanced detection for reliable passenger safety even with carry-on luggage.
  • Optional push button on exit end for emergency open.
  • Moving panel heights from 900–1800 mm for increased security.
  • NEP Lite controller unit.
  • Local/ remote override.
  • Boarding pass reader system: Access IS –LSR116/ 118, 1 Desko – Cube/ BCR504PRO/ pro 504BCR.
  • Passenger display.
  • Gate interface PC is a fan-less performance industrial module.
  • Operating System: Windows 7 Embedded on SSD drive with EWS protection.
  • Other travel ticket media: NFC/ OCR/ RFID/ MSR.
  • CE marked.


  • Airports.
  • Seaports.
  • Museums.

General information


Walkway width from 600 to 900 mm, Boarding pass reader system, Passenger display


Grained stainless steel


AISI 304 stainless steel


1655 x 165 x 1202 mm

Uniclass 2015

Pr_30_59_34_88 Stainless steel half-height turnstilesPrimary


L20/495 Automatic revolving doors

Specification data - Stainless steel half-height turnstiles

Product Reference


Walkway width

Insert requirement, available 600–900 mm.

Accessories/ Other requirements


Emergency open push button


For use in case of power failure.


Torque controlled breakthrough

Special order

Insert requirements.

Standard product features

Footprint size (w x l):

165 x 1655 mm.


  • Casework: AISI 304 grained stainless steel.
  • Moving panels: 10 mm tempered clear glass.
  • Side panels: 10 mm tempered glass.


Highly reliable and long-lasting brushless DC digital servomotor.

Operating modes:

  • Entry: Controlled uni-directional with single person detection.
  • Exit: Exit mode optionally operated by a push button located on the exit side.
  • Emergency: In power failure condition or when a remote emergency signal is sent.
  • Stacking option: If passengers present their boarding passes directly one after the other, the gates does not need to close between them. It counts the passages and closes after the person who presented the last boarding pass. This feature provides flow rates of up to 60 passengers per minute.

Passenger sensors:

Unique single person detection system and algorithm, with a total of 16 (including six safety sensors) to comply with the latest EU safety regulations.

Controlling unit:

Dedicated gate controller architecture.

Configuration and remote control:

  • Manual configuration with on-board push buttons and display.
  • Full remote control and diagnostics through ModBus Protocol on RS232.


  • Gate: Modbus Protocol on RS232, Digital I/O.
  • Embedded PC: 4 x RS232, 4 x USB2.0, LVDS and HDMI Video, 2 x Ethernet.

LCD colour display:

  • 10.1" WXGA 800 x 1280 resolution.
  • Thin housing, with embedded status light.
  • Touch screen options available.
  • Entry leg and central position options.

Status lights:

  • LED way mode red/ green indicator on top of display panel (visible on both sides) to indicate the status of the lane to an agent observing the gate.
  • Green/ red status lights around the 2D barcode reader and printer to indicate to the passenger to present a boarding pass.
  • Gate-End-Display informing queuing passengers in front of the gate about the status with a green arrow/ red cross pictogram.

Technical characteristics:

  • Power supply: 230 V AC (50 Hz)/ 115 V AC (60 Hz).
  • Power rating: 240 VA during panel movement, 60 VA in standby mode.
  • Operating temperature: -5 to +40°C.
  • IP rating: IP43.
  • Flow rate: 10–12 passengers/ minute (in BCBP reading mode connected to the airport clearance system).
  • Mean cycle between failure (MCBF): 10 million cycles.

Digital objects
PlatformCompatibleVersionCertified to
- 2 2.1
- 2 2.1
Download now from NBS National BIM Library
Similar products from Gunnebo UK Ltd