Polyflor EC Sheet

Polyflor EC is 2 mm gauge electrostatic conductive sheet floor covering, engineered for ESD protection and designed for various applications up to light industrial installation.

These products are recommended for use in electronics manufacturing - wafer fabrication, product assembly, inspection and storage; laboratories; clean rooms and defence establishments. Polyflor EC is also recommended for healthcare facilities where gases and/or electronic equipment are used during medical procedures - operating theatres, anaesthetizing areas, intensive-care units and radiology departments.

A conductive earthing grid should be installed as per Polyflor instructions.

Polyflor EC is 100% recyclable, through Recofloor and contains 25% recycled material. It achieves a generic BRE A+/A rating and generic EN 15804 EPD.

General information


Homogeneous vinyl

Uniclass 2015

Pr_35_57_71_67 Polyvinyl chloride (PVC) sheetsPrimary


M50/150 Sheeting

M50/20 Sheeting

Specification data - Polyvinyl chloride (PVC) sheets

Product Reference

Polyflor EC sheet


8990 - Black/Grey

Standard product features


Homogeneous vinyl.


2 mm.


2 m.

Electrical performance:

  • EN 1815 < 2 kV.
  • EN 1081 R1/R2 5 x 10^4 - 1 x 10^6 Ohms.
  • ESD S 7.1 - 5 x 10^4 - 1 x 10^6 Ohms.
  • BS EN/IEC 61340-4-1 RG 5 x 10^4 to 1 x 10^6 Ohms.
  • BS EN/IEC 61340-4-5- <100v.

The quoted electrical resistance readings are obtained only when the materials are installed according to the instructions laid down in the Polyflor Technical Information Manual and tested in accordance with the specified standard.

Please note the symbol ^ represents an exponent (to the power of).

Third party certifications
  • Generic : A+ rating
Similar products from Polyflor Ltd