Plaza Lineal

Plaza Lineal

Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type

AG

Premium paving and flagstones.

Jump to:
+44 (0) 28 8778 8112 www.ag.uk.com
Description

Premium paving and flagstones supplied in a mix of four different sized units in patio packs.

General information

Finish

Textured

Uniclass 2015

Pr_25_93_60_19 Concrete paversPrimary

CAWS

Q24/10 Conventional concrete block paving

Q24/110 Conventional concrete block paving

Q24/112 Conventional concrete block paving with bound base

Q24/113 Conventional concrete block paving overlay

Specification data - Concrete pavers

Product Reference

Plaza Lineal

Colour

Kanel

Lakrids

Pepper

Safran

Salt

Sesam

Standard product features

Finish:

Textured.

Size (l x w):

Supplied in a mix of four different sized units in patio packs: 500 x 135 mm (18.28 kg per unit), 425 x 135 (15.52 kg per unit), 325 x 135 mm (11.85 kg per unit) and 250 x 135 mm (9.1 kg per unit).

Depth:

120 mm.

Edges:

Straight chamfer.

Standard:

Manufactured to BS EN 1339:2003/ BS EN 1338:2003.

Spacer nibs:

1.5 mm spacers on each paver leaving a 2 mm minimum joint when laid.

Technical characteristics:

  • Granite content: Not less than 90% natural granite and quartz aggregate in surface layer.
  • Efflorescence: State-of-the-art factory-controlled vapour curing significantly reduces this naturally occurring chemical reaction.
  • Bending strength: >5 MPa (this applies to all sizes). For specific force performance on a given size, contact manufacturer's Technical Specification Department.
  • Tensile splitting: >3.6 MPa (applies to all sizes).
  • Strength: For specific force performance on a given size, contact manufacturer's Technical Specification Department.
  • Slip/ skid resistance (USRV): >75 low potential for slip. Specific slip/ skid resistance results are available from manufacturer's Technical Specification Department.

Sustainability:

  • Energy use: 100% renewable energy.
  • Water used: 90% recycled water.
  • Recyclability: 100% of this product can be recycled.
  • Manufacturing location: Produced in the UK using responsibly sourced materials.
  • Non-primary materials: 52–60% (surface layer).
  • Waste wood and plastic: 100% recycled.
  • Carbon footprint: AG have a state-of-the-art wash­ing plant which enables them to produce walling from 100% recycled waste aggregate.
  • BREEAM rating: A Rating – according to the Green Guide to Specification 4th edition 2009. A+ Rating can be achieved when used in conjunction with a prepared recycled sub-base.

Product Options

Colour:

Consult with AG to obtain samples.

Installation:

To BS 7533-4:2006.

Third party certifications
  • BREEAM: A rating : (A+ rating can be achieved when used in conjunction with a prepared recycled sub-base)
Similar products from AG