A solvent-free paste consisting of selected water-emulsified bitumens.
Plastimul is a solvent-free paste consisting of selected water-emulsified bitumens, special fine-graded aggregates and additives. It is compatible with cement and sand in any mix ratio. Plastimul’s thixotropic consistency makes it easy to use for waterproofing vertical and sloping surfaces. It can also be used to waterproof masonry or concrete even when their surfaces are still damp due to insufficient curing or atmospheric condensation.
When completely dry, Plastimul forms a waterproof plastic film that is resistant to re-emulsifying after prolonged immersion in water, even when slightly acid or alkaline, and resistant to aggressive agents present in the soil.
Moisten the surfaces to be treated. Surfaces must be free of cement laitance, as well as any residues of oil or grease from formwork release agents. The surface must free of excess material and aggregate. Cracks or crazing in the substrate must be repaired with Mapegrout Thixotropic or Mapefinish.
J30/10 Cold applied damp proofing
J30/110 Cold applied tanking . . . . . .
J30/130 Cold applied damp proofing . . . . . .
M60/18 Special coating
M60/195 Special coating
Dilute coat of Plastimul
Horizontal surfaces not subject to foot traffic.
Two render coats
Horizontal surfaces subject to foot traffic.
Mapei fibreglass mesh
Fine graded sand (0–1 mm)
Dilute coat of Plastimul. Dilute 45–50% with water and mix until completely homogenous. Apply the solution with a brush. Allow to dry completely (3–6 hours) before application of subsequent layers.
Waterproofing vertical surfaces:
Waterproofing horizontal surfaces not subject to traffic:
Waterproofing horizontal surfaces subject to foot traffic:
Mapei fibreglass mesh inserted into first Plastimul render coat whilst still wet (to be used when Plastimul applied over substrate with crazing).
© 2021 NBS Enterprises Ltd. All rights reserved.