Compare

PFC Corofil Insulated Fire Sleeve

Name: PFC Corofil Insulated Fire Sleeve
Brand: 8pZr9Ub7CXY2Bh6wPAZzzc
SKU: hMvWb3u4kCyVSAiei9LVQk

PFC Corofil Fire Stop Products

Insulated fire sleeve installed around metal and plastic pipes through non-load bearing wall and floor constructions.

Jump to:

+44 (0)20 8391 0533 www.pfc-corofil.com

Application

Installed around metal and plastic pipes to form a penetration seal, to reinstate the fire resistance performance of non-load bearing wall and floor constructions where they have been provided with apertures for the penetration of the services.

Description

Insulated fire sleeve for use around metal and plastic pipes through non-load bearing wall and floor constructions. It can be cut down along its length to aid fitment and a strip of aluminium foil tape is used to seal the joint. Suitable for polyvinyl chloride (PVC), high-density polyethylene (HDPE), copper and steel pipes.

Can be installed within flexible and rigid walls with a minimum of thickness of 132 mm. Flexible walls may be constructed with or without insulation in the cavity. Can also be installed within rigid floors with a minimum of thickness of 150 mm.

Features and benefits:

Acoustic rating of up to 49 dB.

No over sleeving required.

Comprehensive range of sizes.

Reduces cold bridging on insulated pipe systems.

Suitable for use with, brick, block, masonry, plasterboard and PFC Corofil Coated Panel System.

Applications:

General information

Material	Flexible intumescent material, consisting primarily of mineral fibres, intercalated graphite and organic binders. It has a glass fibre reinforced aluminium foil cladding around the perimeter along its full length

Uniclass 2015	Pr_65_52_61_15 Concealed intumescent pipe collarsPrimary
CAWS	P12/370 Pipe collar P12/43 Pipe collar

Product range	Pipework

Specification data - Concealed intumescent pipe collars

Product Reference	PFC Corofil Insulated Fire Sleeve
Diameter	Insert requirement, consult manufacturer's literature for more information.
Length	Insert requirement, consult manufacturer's literature for more information.

Standard product features

Material:

Flexible intumescent material, consisting primarily of mineral fibres, intercalated graphite and organic binders. It has a glass fibre reinforced aluminium foil cladding around the perimeter along its full length.

Colour:

Grey.

Wall thickness (nominal):

25 mm.

Fire rating (to BS 476-20: 1987 and BS EN 1366-3: 2009):

Up to four hours (240 minutes) dependent on size and pipe material, consult manufacturer's literature for more information.

Acoustic rating:

Tested to provide a weighted sound reduction index (Rw) of up to 49 db. The compressible nature of the material used to manufacture the product can reduce the potential of any structural borne pipe noise.