NBS Source
I'm a manufacturer

PermaTEC Ecowrap Blue Roof System

Verified by manufacturer 5 months ago

AccuRoof

Hot melt monolithic waterproofing system.

Jump to:
+44 (0)1509 505714 Website

Application

Hot melt monolithic waterproofing for blue roof systems.

Description

PermaTEC Hot Melt Monolithic Waterproofing Systems include PermaTEC EcoWRAP waterproofing compounds, that is specially formulated combinations of refined bitumen, synthetic rubbers, fillers and other additives, which are hot-applied in conjunction with carefully selected reinforcement/detailing fabrics and protection layers to give the ultimate waterproofing performance.


Features and benefits:

  • Hot applied system.
  • Suitable for zero fall roof decks.
  • BBA Certified No. 03/4009.
  • Durable – lasts the design life of the building.
  • Nominal membrane thickness of 6 mm.
  • Tough and resistant to impact damage.
  • Excellent low temperature flexibility.
  • High bond strength to substrate - High tensile strength.
  • Homogenous and seamless.
  • Seamless application and rapid setting – resistant to rain, snow and frost immediately after application.
  • Virtually no packaging to be disposed of (zero wrapper waste).

General information

Color

Black

Finish

Other

Guidance for specification option:

20—40 Round Washed Ballast.

Material

Bitumen

Rubber

Polystyrene

Polypropylene

Polymer

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

25 year

Guidance for specification option:

Up to 25 years dependent on project size and details.

Uniclass

Ss_30_40_30_71 Reinforced bitumen membrane inverted roof covering systemsPrimary

CAWS

J41/120 Built-up reinforced bitumen membrane inverted roof covering

J41/14 Reinforced bitumen membrane inverted roof covering

Specification data - Reinforced bitumen membrane inverted roof covering systems

System performance

Waterproofing.

Preparation

-

Horizontal work

IKO Permatec primer.

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 246025000.
  • Appearance: Liquid.
  • Colour: Red.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 4 m²/Litre.
  • Drying Time: Typically 1 Hour.

IKO Permatec high penetration primer.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 24600025.
  • Appearance: Liquid.
  • Colour: Black.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 6—8 m²/Litre.
  • Drying Time: Typically 4 Hours.

Skirtings and vertical work

IKO Permatec primer.

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 246025000.
  • Appearance: Liquid.
  • Colour: Red.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 4 m²/Litre.
  • Drying Time: Typically 1 Hour.

IKO Permatec high penetration primer.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 24600025.
  • Appearance: Liquid.
  • Colour: Black.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 6—8 m²/Litre.
  • Drying Time: Typically 4 Hours.

Waterproof covering

-

First layer

-

Type

PermaTec Ecowrap.

Guidance for specification option:

A hot applied specially formulated combination of refined bitumen, synthetic rubbers, fillers and other additives.

  • Code: 24110080.
  • Product Colour: Black.
  • Product Type: Hot Melt.
  • Applied on primed deck with Flash R reinforment.

Attachment

Hot-applied.

Intermediate layer

-

Type

Permaguard F Protection Sheet.

Guidance for specification option:

IKO Permaguard-F is a sand surfaced 180 g/m² polyester based bitumen membrane. It is installed as a protection layer into the final coat of the IKO Permatec whilst it is still hot.

  • Product Colour: Black.
  • Product Finish: Sand.
  • Product Type: Hot Melt.
  • Length: 20000 mm.
  • Weight: 39 kg.
  • Width: 1000 mm.
  • Laid on hot Permatec.

Top layer

-

Type

Eco Green Roof Blue Roof System.

Attachment

Loose laid.

Detail work

-

Flashings

IKO PermaFLASH-D150.

Guidance for specification option:

A nominal 1.25 mm thick flexible bitumen EPDM polymer detailing sheet which is installed as a reinforcement layer over cracks, construction joints, changes in materials and where minor movement may occur.

  • Code: 24150000.
  • Roll weight: 4.8 kg.
  • Roll width: 150 mm.
  • Roll length: 20 m.

IKO PermaFLASH-D500.

Guidance for specification option:

A flexible bitumen EPDM polymer detailing sheet, which is installed as a reinforcement layer around rainwater outlets.

  • Code: 24500000.
  • Roll weight: 16 kg.
  • Roll width: 500 mm.
  • Roll length: 20 m.

IKO PermaFLASH-UN.

Guidance for specification option:

A very flexible un-cured neoprene rubber reinforcement sheet for use as part of the IKO Permatec hot melt waterproofing system over construction joints and structural movement joints with a maximum width of 25 mm and maximum 50% total movement.

  • Code: 24600000.
  • Roll weight: 21 kg.
  • Roll width: 300 mm.
  • Roll length: 30 m.

IKO PermaFLASH-R.

Guidance for specification option:

A 55 g/m² polyester reinforcement layer, installed between the two applications of PermaTEC EcoWrap or PermaTEC Anti- Root.

  • Code: 24991000.
  • Roll weight: 11 kg.
  • Roll width: 1 m.
  • Roll length: 20 m.

IKO PermaGUARD-F.

Guidance for specification option:

A sand surfaced 180 g/m² polyester based bitumen membrane, installed as a protection layer in standard PermaTEC and PermaTEC Anti Root systems.

  • Code: 24010000.
  • Roll weight: 42 kg.
  • Roll width: 1 m.
  • Roll length: 20 m.

Skirtings and upstands

IKO PermaGUARD-M Torch On (T-O).

Guidance for specification option:

A high performance torch applied SBS modified bitumen membrane with a 270 g/m² polyester fibre carrier. It has a black mineral finish on the upper surface and thermos-fusible film on the underside. It is installed as a protection layer to PermaTEC on exposed upstand details.

  • Code: 24030008.
  • Roll weight: 36 kg.
  • Roll width: 1 m.
  • Roll length: 8 m.

Insulation

-

Type

IKO enertherm XPS rigid extruded polystyrene (XPS) insulation.

Guidance for specification option:

IKO enertherm XPS is a lightweight, lap joined board with high compressive strength and performance.

  • Available in thickness 50—245 mm.
  • Durability: Continuous service temperature limit is up to +70º C.
  • Water Vapour Resistance: 625 MNs/g.m when tested in accordance with BS EN 12086.
  • Moisture Absorption: 0.6% by volume when tested in accordance with EN 12087.
  • Nominal Density: 32 kg/m³.
  • Loose laid.

Filter layer

EGR F Blue filter fleece.

Guidance for specification option:

Filter fleece layer prevents contamination of substrate from entering the drainage components. UV stabilized and optimized for maximum strength and performance – not mass.

  • Code: EGR F.
  • Fire compliance: BS EN 13501-5:2016 and compliant to Broof(t4) classification.
  • Dimensions: 10,000 x 113 mm (L x W).

Ballast

50 mm concrete paving.

Guidance for specification option:

On supports.

System accessories

Guidance for specification option:

Consult manufacturer and insert requirements.

Water control layer

IKO enertherm water control layer.

Guidance for specification option:

IKO enertherm WCL is used as a Water Flow reducing Layer between enertherm XPS insulation and the roof ballast layer in inverted roofs, including green and blue roof applications.

  • Code: 30400001.
  • Length: 100 m.
  • Width: 1.5 m.
  • Area per roll: 120 m².
  • Loose laid.

Drainage layer

EGR H2O Flow 6.

Guidance for specification option:

6 mm HDPE cuspated drainage board with a geotextile filter/separator bonded to a single side.

  • Roll length: 100 m.
  • Roll width: 0.97 m.
  • Roll weight: 115 kg.
  • Compressive strength: to EN ISO 25619-2, 800 kPa.
  • Tensile strength (MD/CMD): to EN ISO 10319, 12 kN/m.
  • Static puncture (CBR): to EN ISO 12236, 1.7 kN.

Sub-base attenuation

EGR EcoVoid 50.

Guidance for specification option:

Load Bearing Blue Roof Attenuation Layer. Three times more permeable than stone sub-bases. Lightweight, strong structure designed to support heavy traffic loading – including HA.

  • Compressive Strength (ASTM D1621): 125 T/m².
  • Weight (Empty): 3.5 Kg/m².
  • Flow Rate per unit width (ASTM D1621): 180 L/min.
  • Surface Area: 96% Void.
  • Long-term Unconfined Creep Test: 42 day deadload 500 kN/m².
  • No displacement: No further creep.

Membrane

EGR CloudLayer.

Guidance for specification option:

EGR CloudLayer is a single layer cold applied geomembrane suitable for environmental protection to structures, containments, and cut-off trenches. EGR CloudLayer is laid in a single layer over a prepared site. Due to its inherent weldability and on site quality assurance monitoring, the membrane is recommended to be laid by trained operatives certified for the purpose.

Base layer

Deck.

Guidance for specification option:

Supplied by others.

Sustainability data

Country of material origin

United Kingdom

Guidance for specification option:

Raw materials are from multiple countries, however, Permatec Hot Melt is UK manufactured.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

45 %

Guidance for specification option:

PermaTEC EcoWRAP.

Similar products from AccuRoof

PermaTEC Ecowrap Inverted Roof System

PermaTEC Ecowrap Inverted Roof System

© 2024 NBS Enterprises Ltd. All rights reserved.