Over 50% Lower Embodied Carbon - IKO Permatec LI Standard Inverted Hot Melt Roofing & Waterproofing System - Hot Applied Liquid Waterproofing System
Verified by manufacturer 1 month ago
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
BBA Agrément Certificate
Certificate type
EPD
Certificate type
Hot melt bitumen membrane roofing and waterproofing system.
Application
- Waterproofing layer in protected flat roofs (including zero fall), inverted roofs, and blue roof specifications, in combination with a storm water attenuation system.
- Suitable for community and amenity, education, health, hotel and leisure, industrial, mixed-use, offices, utilities, and retail applications.
Description
Crafted with meticulous attention to detail, the hot melt aspect of the IKO Permatec LI Inverted Roof System arrives at your site in fully dispersible 12 kg blocks. This ensures ease of handling and installation efficiency. The standard inverted roof build-up is a fully bonded system, where every element seamlessly integrates to create a robust protective barrier. With IKO Permatec LI, every layer works cohesively, ensuring sound structural integrity and weatherproofing capabilities. Exposed detailing is made UV stable through the application of the IKO Permaguard-M Torch-On Capsheet.
Key benefits to your project:
- Achieves over 50% lower embodied carbon with the IKO Permatec LI membrane.
- BBA approved.
- Less waste to control and dispose of meaning zero waste packaging.
- Long-lasting, durable waterproofing.
- Simple system – easy specification.
- Tough and resistant to impact damage because of its high tensile strength.
- Easily recyclable.
- Excellent low temperature flexibility.
- Outstanding durability – lasts for the design time of the building.
- Rapid setting.
- Backed with a 25 year guarantee.
General information
Color | Black |
Material | Bitumen Guidance for specification option: A hot applied roofing waterproofing membrane system manufactured from a specially formulated combination of refined bitumen, synthetic rubbers, fillers and other additives. |
Length | Bespoke |
Width | Bespoke |
Warranty description | 25 year Guidance for specification option: Up to 25 years. |
Uniclass | |
CAWS | J31/130 Inverted roof coating J31/12 Inverted roof coating |
Specification data - Liquid-applied inverted roof covering systems
Preparation | |
Horizontal work | IKO Permatec Polymer Primer.IKO Permatec high penetration primer. |
Skirtings and vertical work | IKO Permatec Polymer Primer.IKO Permatec high penetration primer. |
Liquid-applied waterproofing | |
Type | 2 no. coats of IKO Permatec LI Ecowrap hot melt compound.2 no. coats of IKO Permatec LI Ecowrap hot melt compound, plus IKO Permaguard-HDPB (Heavy Duty).Guidance for specification option: Permaguard-HDPB is a 3 mm thick high density polymeric protection board with high impact resistance for use in heavy-duty situations. It is installed into the second coat of Permatec Compound whilst it is still hot. 2 no. coats of IKO Permatec LI Ecowrap hot melt compound, plus IKO Permaguard-PB.Guidance for specification option: Permaguard-PB is a 3.2 mm thick protection board, fabricated with a bituminous core and glass fibre reinforcement. It is installed into the second coat of Permatec Compound whilst it is still hot. |
Reinforcement | IKO Permaflash-R reinforcement. |
Surface treatment | IKO Permaguard-F protection layer.IKO Roofgarden 4 APP AD/F.Guidance for specification option: IKO Roofgarden is used as the top layer to reinforced bitumen membrane systems when installing roof garden finishes above. |
Insulation | |
Type | IKO enertherm XPS insulation board.Guidance for specification option: Available in thicknesses from 50–220 mm. Consult manufacturer and insert requirements. |
Water control layer | IKO enertherm water control layer. |
Drainage layer | Not required. Required. Guidance for specification option: For roof garden applications. Consult manufacturer and insert requirements. |
Flashings and detail work | Not required. IKO PermaFLASH-D150. Guidance for specification option: A nominal 1.25 mm thick flexible bitumen EPDM polymer detailing sheet. A reinforcement layer of PermaFLASH-D150 should be applied prior to applying the PermaTEC membrane at all non-monolithic changes in substrate materials, at structural/shrinkage cracks between 3 and 6 mm wide, at structural joints between 6 and 12 mm wide and where minor movement may occur. IKO PermaFLASH-D500. Guidance for specification option: A flexible bitumen EPDM polymer detailing sheet, installed as a reinforcement layer around rainwater outlets. IKO PermaFLASH-UN. Guidance for specification option: At structural movement joints up to 25 mm (maximum 50% total movement), PermaFLASH-UN reinforcement must be installed fully bonded in hot Permatec compound centrally over the movement joint. At structural movement joints between 12 and 50 mm (maximum 50% total movement), a proprietary joint system must be installed. Consult manufacturer for suitable products. |
Upstand | Exposed upstand details: IKO PermaGUARD-M Torch On (T-O) protection layer. Guidance for specification option: A protection layer to PermaTEC on exposed upstand details. |
Sustainability data
Contains Red List materials | Yes |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Bitumen Guidance for specification option: A hot applied roofing waterproofing membrane system manufactured from a specially formulated combination of refined bitumen, synthetic rubbers, fillers and other additives. |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 1.61 kg CO₂ eq/kg |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 45 % |
Expected Life | 60 year |
Third party certifications
Third party certifications
ISO 45001 Health and Safety Management
IKO PLC ISO 45001 OHS Certificate
ISO 9001 Quality Management
IKO PLC ISO 9001 Certificate
BBA Agrément Certificate
BBA Certificate - IKO Permatec LI Standard Inverted
EPD
EPD Certificate - IKO Permatec LI Hot Melt Waterproofing System
Literature
Brochure - IKO PLC (UK) ESG Report
Brochure - IKO Permatec Systems
Installation Guide - IKO Permatec Systems
Technical Data Sheet (TDS) - IKO enertherm XPS PLUS & WCL PLUS
Technical Data Sheet (TDS) - IKO enertherm XPS Upstand Board
Technical Data Sheet (TDS) - IKO enertherm XPS & WCL
Technical Data Sheet (TDS) - IKO Permatec High Penetration Primer
Technical Data Sheet (TDS) - IKO Permatec LI
Technical Data Sheet (TDS) - IKO Permatec Polymer Primer
Similar products from IKO UK
Cold Applied Liquid System for Roofs, Balconies & Terraces - IKO metatech - Cold Applied Liquid Waterproofing
IKO Permatec Anti-Root Inverted Hot Melt Roofing & Waterproofing System - Hot Applied Liquid Solution
IKO Permatec Standard Inverted Hot Melt Roofing & Waterproofing System - Hot Applied Liquid Waterproofing System
Over 50% Lower Embodied Carbon - IKO Permatec LI Anti-Root Inverted Hot Melt Roofing & Waterproofing System - Hot Applied Liquid Solution
Single Component Cold Applied Liquid System for Inverted Roofs - IKO hybritech 1K PU - Waterproofing system