Nitoflor FC130
Description

Nitoflor FC130 is a water dispersed epoxy resin coating, providing a dust-proof, easily cleaned surface, which is resistant to most oils and liquids. It provides a hard, flexible, semi-matt, non-flammable seal to concrete and other substrates. It is designed for use on walls and floors in warehouses, garages, light industrial and food processing areas, kitchens and other areas of pedestrian and light vehicular traffic. It can be applied to asphalt floors provided they are at least six months old.

Nitoflor FC130 can be used to overcoat Cemtop XD to provide a more easily cleaned, chemically resistant surface. Apply two coats, the first within six hours after the installation of Cemtop XD.

Fire performance:

Class 1 spread of flame to BS 476: Part 7: 1971.

Preparation:

Substrates are to be sound, dry and clean, with a fine textured surface. Remove any surface irregularities that may show through the coating which may cause excessive wearing on high spots and change the perceived colour of the coating.

Do not apply below 10°C or where ambient relative humidity exceeds 85%.

General information
Specification data - Resin floor coatings

Product Reference

Nitoflor FC130

Resin flooring

-

Type

Two coats by brush or lambswool roller

Nominal thickness

100 micrometres

Standard product features

Resin flooring application:

Second coat should be applied as soon as the first coat has initially dried (typically 12 to 18 hours, dependent on type of surface and ambient conditions).

Product Options

Colour:

Consult manufacturer for details.

Surface finish/ treatment:

Nitoflor FC Anti-slip Grains can be added towards the end of the mixing process.

Literature
Similar products from Fosroc International Limited