Nitoflor DPM has been designed for use as a primer/ coating on cementitious surfaces which possess high levels of residual moisture. Nitoflor DPM can be used where an integral damp-proof membrane is either not present or not effective.

After curing, Nitoflor DPM provides a surface membrane with excellent adhesion to damp concrete. Hygrometer readings up to 98% RH within the substrate can be accommodated.


  • Permits early overlaying with vinyls, carpets and resin based products without the conventional “drying out” period being observed.
  • Provides an alternative priming system for damp tolerant applications of Fosroc resin flooring systems.

General information

Uniclass 2015

Pr_35_31_66_30 Floor covering primersPrimary


J30/10 Cold applied damp proofing

J30/130 Cold applied damp proofing . . . . . .

Specification data - Floor covering primers

Product Reference

Nitoflor DPM




Product Options


Typically one coat of 250 microns for priming only where a below slab or integral membrane is present.

Similar products from Fosroc International Limited