NBS Source
List your products
Application

The system is suitable for a variety of pumping tasks, ranging from the lifting of sewage from basements to a higher level sewage system, to the removal of ground water and surface drainage.

Description

Specialist, multi-use pumping system.

Due to the system being modular, the sump is available in a variety of sizes, ranging from 1200–2100 mm high, in increments of 300 mm. With an internal diameter of 830 mm, the sump is large enough to hold 24 hours of storage as required by the Building Regulations (Approved Document H).

If the lowest invert is within 300 mm from FFL, the 1500 mm high sump is able to provide 300 L of 24 hour storage which sufficient for one bedroom properties. For 450/ 600 L of storage, the 1800 mm or 2100 mm sump chambers should be used respectively.

Where greater than 24 hour storage is required or where the invert is lower, one of the larger ‘whole house’ pumping systems may be required. Consult manufacturer for details.

Applications:

The system is suitable for a variety of pumping tasks, ranging from the lifting of sewage from basements to a higher level sewage system, to the removal of ground water and surface drainage.

General information
Specification data - Private packaged pumping stations
Product Reference

Newton Trojan-Pro

Type

Newton BCV-750-65 - P50

Newton BCV-750-65 - P51

Newton CP400

Newton CP750 - P33

Newton NP400 - P2

Newton NP400 - P3

Newton NP750 - P5

Newton NP750 - P6

Newton SP750 - P36

Height

1200 mm

1500 mm

1800 mm

2100 mm

Product Options

Type:

- Ground and surface water:

  • Newton CP400 - P32: The Newton CP400 is a medium head and medium performance clean water pump.
  • Newton NP400 - P2 and P3: The Newton NP400 is a high head and medium performance clean water pump.
  • Newton CP750 - P33: The Newton CP750 is a medium head and high performance clean water pump.
  • Newton NP750 - P5 and P6: The Newton NP750 is a high head and high performance clean water pump.

- Foul water:

  • Newton BCV-750-65 - P50 and P51 - The Newton BCV- 750-65 is a 65 mm vortex pump that is large enough to remove waste water without the need for cutting. Note: Requires 90 mm rising main and check-valve with at least 60 mm opening.
  • Newton SP750 - P35 and P36 - The Newton SP750 Cutter - P35 and P36, incorporates a tungsten carbide tipped cutting impellor that rotates against a serrated suction cover in order to cut solid waste before pumping. Note: Requires 63 mm rising main. Cutting pumps are less able top deal with wet wipes and sanitary wear.

Please Note: For safety reasons, pumps within the 1800 and 2100 mm deep chambers, should be on guide rails.

Similar products from Newton Waterproofing Systems