Newton Control Panel Pro (CP2 / CP7)

The Newton Control Panel-Pro is a pump control panel which has been designed to provide pump operation and diagnostics. The panel features interfaces for use with Newton battery back-up and telemetry systems as well as connections to whole house alarm and monitoring systems.

The Control Panel PCB is split with two separate circuits, ensuring that pumping will continue even if one of the control circuits should fail. This effectively means that the Newton Control Panel-Pro is two control panels within one case, offering unrivalled redundancy.

Self-diagnostic programs test the pumps on a weekly basis to ensure correct pump performance, with the appointed service engineer automatically informed of any detected problem with either of the pumps if the Newton Dialer telemetry system is installed.

The Newton Control Panel-Pro will operate a maximum of two 750 W/ 230 V AC pumps. The panel is supplied with a vertical water level float switch and high water alarm float switch. The panel is designed to be used with an optional Newton Victron Battery Back-Up System, sized to suit the pumps and installed with sufficient battery power to ensure continued pumping during power outages.

Features and benefits:

• Automatic alternate duty cycle.

• Has the ability to receive two totally independent power supplies; one from the mains, and one from a Victron Battery Backup System.

• Alarm will sound upon detecting power failure.

• Provides automatic electrical current monitoring for each pump, as well as automatic pump duty assist.

• If the main float fails or becomes disconnected, the alarm float automatically takes over as the level control float.

• An alarm checking signal is continually monitored to confirm the alarm float cables have been fitted correctly, not been tampered with or disconnected.

• Each pump has a separate electronic circuit - this allows for one pump to continue operation if a fault develops.

• Automatic testing of each pump every seven days.

• 32 different alarm warning sounds are available.

• Each pump is controlled by a zero voltage solid state triac.

• Each pump circuit has its own LCD display with a built-in flash memory.

• Each pump has a manual override button and a reset button.

• Supplied with a one-year back to base warranty which is dated from either the date of purchase or a proven date of installation - consult manufacturer for details.

For further information, please consult manufacturer.