NBS Source
Newton 906 Lime Inhibitor

Application

Floors:

  • Concrete floors newer than 12 months:
  • The whole of the concrete slab or raft as well as the recess formed ready for Newton Basedrain or Floordrain Drainage Conduit.
  • Concrete floors older than 12 months:
  • The recess cut into the concrete ready for Newton Basedrain or Floordrain Drainage Conduit as well as 200 mm either side of floor construction or movement joints.

Walls:

  • 200 mm up the wall from the floor, or where a ‘kicker’ has been formed to a concrete wall, apply from the floor up to 200 mm above the kicker.
  • Underpinned properties require application to 200 mm either side of the joints. Dry-packed areas should be sealed with a cement-based tanking product and then the tanking treated with Newton Lime Inhibitor.

Description

Newton 906 Lime Inhibitor is applied to concrete surfaces prior to the installation of a Newton System 500 cavity drain membrane waterproofing system to prevent the ‘leaching’ of free lime from the concrete. Primarily designed to be used on new concrete structures, Newton Lime Inhibitor should also be used a treatment to cut recesses to existing concrete slabs.


Features and benefits:

  • Solvent and caustic free.
  • Easy to use and handle.
  • Non-hazardous (on dilution).
  • Compatible with alkaline substrates.
  • Long term durability.

Related system products:

  • Newton 313 WaterPlug: Fast setting, polymer compound that instantly stops running water or seepage through masonry or concrete substrates.
  • Newton 203-RM: Rapid setting mortar for the creation of angle fillets for use with Newton System 100 cement-based renders and Newton System 200 liquid applied deck and roofing products.

General information

Material

Lime Inhibitor

Shape

Form - single component: Low viscosity liquid

Size

Pack size (plastic container): 1 L

Uniclass 2015

Pr_35_31_66_67 Primer-sealersPrimary

CAWS

J40/335 Primers

Product range

Primers, Preparation and Reinforcement

Specification data - Primer-sealers Enhanced data

Composition

Solvent-free.

Product Reference

Newton 906 Lime Inhibitor (LC1)

Specific gravity

1.02.

Weight

1.1 kg.

Yield – When mixed with 9 L of water

10.0 L.

Application rate – Open surface, porous concrete

0.2 L/m².

Application rate – Normal concrete

0.1 L/m².

Application rate – Power floated concrete

0.08 L/m².

Shelf life

12 months.

Application temperature

+5°C to +35°C.

Service temperature

-15°C to +80°C.

Odour

None.

VOC content

None.

Similar products from Newton Waterproofing Systems

Newton 901-P

Newton 901-P

Newton 902-P

Newton 902-P

Newton 903-P

Newton 903-P