NBS Source
Newton 902-P

Application

Suitable for the priming of damp, non-porous concrete and screed to provide a DPM and vapour barrier, prior to the application of moisture sensitive flooring, coatings, membranes, levelling compounds and screed.

Areas of application include:

  • Podium decks;
  • Car parks;
  • Warehousing and storage;
  • Garages;
  • Plant rooms.

Description

Two-part, solvent free, damp tolerable, epoxy based primer which is above Newton 901-P pre-primer as a barrier to residual substrate moisture and vapour within concrete and screeds.

The high quality, low viscosity, epoxy formulation of the combined application of the primer and pre-primer is suitable for application onto damp surfaces, allowing for the speedy application of flooring, coatings, membranes, levelling compounds and screeds to damp substrates. Newton 902-P is quick and simple to use and can be applied over cementitious screeds and concrete just 7 days after placement.

It is applied by brush or roller in one coat and is a key component of the Newton NewSeal Flooring System for the sealing, coating and protection of exposed screed and concrete surfaces.


Features and benefits:

  • Very damp-tolerable.
  • Can be applied to concrete and screed seven days after placement.
  • Solvent free.
  • Excellent vapour barrier.
  • High-bond DPM that provides a barrier to vapour and prevents osmotic blistering.
  • Life expectancy is equal to that of the surface it is applied to.


Suitable substrates:

Indoor or outdoor floors of correctly formed, compacted and prepared:

  • Concrete of at least seven days old;
  • Screed of at least seven days old.

General information

Color

Carmine Red (RAL 3013). RAL Colour is based on the paste and is not the exact finished colour. Other colours are available on request but will be subject to lead time and minimum order quantity - consult manufacturer for further details.


-

Material

Damp Tolerable Primer for Non-Porous Surfaces

Shape

Form - Two component: Low viscosity epoxy resin

Uniclass 2015

Pr_35_31_66_67 Primer-sealersPrimary

CAWS

J30/110 Cold applied tanking . . . . . .

J31/110 Cold deck roof coating

J31/120 Warm deck roof coating

J31/130 Inverted roof coating

J31/353 Waterproof coating

J40/295 Geocomposite studded cavity drainage/ venting membrane

Product range

Primers, Preparation and Reinforcement

Specification data - Primer-sealers Enhanced data

Composition

Two-part, solvent free, damp tolerable, coloured, epoxy-based primer.

Product Reference

Newton 902-P

Specific gravity

1.1.

Pack size (plastic container)

5.0 kg.

Weight

5.2 kg.

Yield per kg

0.9 L.

Application rate - 1st coat over Newton 901-P

0.25 kg/m².

Application rate - further coats

0.25 kg/m².

Shelf life

12 months.

Pot life at 20°C and Relative Humidity (RH) of 40%

30 minutes.

Minimum application temperature - substrate

+5°C (and rising).

Maximum application temperature - air

+30°C.

Service temperature

-15°C to +50°C.

Odour

Ammonia smell when mixing.

VOC content

Below 100 g/L.

Membrane thickness - first coat

0.23 mm.

Membrane thickness - further coats

0.23 mm.

Adhesion to concrete (>B2.0)

3.5 MPa.

Water vapour transmission rate – UK Perm

>1.0g/m²/24 hrs.

Water vapour diffusion resistance – Sd value

2.066 m.

Water vapour diffusion resistance – µ value

11478 µ.

Water vapour diffusion resistance

10.331 MNs/g.

Reaction to fire classification – Not determined

F - Euroclass.

Similar products from Newton Waterproofing Systems

Newton 901-P

Newton 901-P

Newton 903-P

Newton 903-P

Newton 906 Lime Inhibitor

Newton 906 Lime Inhibitor