Newton 902-P
Damp tolerable primer for non-porous surfaces.
Priming of damp, non-porous concrete and screed to provide a DPM and vapour barrier, prior to the application of moisture sensitive flooring, coatings, membranes, levelling compounds and screed. Areas of application include:
- Podium decks.
- Car parks.
- Warehousing and storage.
- Garages.
- Plant rooms.
Two-part, solvent free, damp tolerable, epoxy based primer which is above Newton 901-P pre-primer as a barrier to residual substrate moisture and vapour within concrete and screeds.
The high quality, low viscosity, epoxy formulation of the combined application of the primer and pre-primer is suitable for application onto damp surfaces, allowing for the speedy application of flooring, coatings, membranes, levelling compounds and screeds to damp substrates. Newton 902-P is quick and simple to use and can be applied over cementitious screeds and concrete just 7 days after placement.
It is applied by brush or roller in one coat and is a key component of the Newton NewSeal Flooring System for the sealing, coating and protection of exposed screed and concrete surfaces.
Features and benefits:
- Very damp-tolerable.
- Can be applied to concrete and screed seven days after placement.
- Solvent free.
- Excellent vapour barrier.
- High-bond DPM that provides a barrier to vapour and prevents osmotic blistering.
- Life expectancy is equal to that of the surface it is applied to.
Suitable substrates:
Indoor or outdoor floors of correctly formed, compacted and prepared:
- Concrete of at least seven days old.
- Screed of at least seven days old.
Application:
Priming of damp, non-porous concrete and screed to provide a DPM and vapour barrier, prior to the application of moisture sensitive flooring, coatings, membranes, levelling compounds and screed. Areas of application include:
- Podium decks.
- Car parks.
- Warehousing and storage.
- Garages.
- Plant rooms.
Features | Very damp-tolerable, solvent-free, and an excellent vapour barrier, can be applied to concrete and screed 7 days after placement |
Material | Damp Tolerable Primer for Non-Porous Surfaces |
Shape | Form - Two component: Low viscosity epoxy resin |
Uniclass 2015 | |
CAWS | J30/110 Cold applied tanking . . . . . . J31/110 Cold deck roof coating J31/120 Warm deck roof coating J31/130 Inverted roof coating J31/353 Waterproof coating J40/295 Geocomposite studded cavity drainage/ venting membrane |
Product Reference | Newton 902-P |
Composition | Two-part, solvent free, damp tolerable, coloured, epoxy-based primer |
Specific gravity | 1.1 |
Pack size (plastic container) | 5.0 kg |
Weight | 5.2 kg |
Yield per kg | 0.9 L |
Application rate - 1st coat over Newton 901-P | 0.25 kg/m² |
Application rate - further coats | 0.25 kg/m² |
Shelf life | 12 months |
Pot life at 20°C and Relative Humidity (RH) of 40% | 30 minutes |
Minimum application temperature - substrate | +5°C (and rising) |
Maximum application temperature - air | +30°C |
Service temperature | -15°C to +50°C |
Odour | Ammonia smell when mixing |
VOC content | Below 100 g/L |
Membrane thickness - first coat | 0.23 mm |
Membrane thickness - further coats | 0.23 mm |
Adhesion to concrete (>B2.0) | 3.5 MPa |
Water vapour transmission rate – UK Perm | >1.0g/m²/24 hrs |
Water vapour diffusion resistance – Sd value | 2.066 m |
Water vapour diffusion resistance – µ value | 11478 µ |
Water vapour diffusion resistance | 10.331 MNs/g |
Reaction to fire classification – Not determined | F - Euroclass |
Standard product features | Colour: Carmine Red (RAL 3013). RAL Colour is based on the paste and is not the exact finished colour. Other colours are available on request but will be subject to lead time and minimum order quantity - consult manufacturer for further details. Features: Very damp-tolerable, solvent-free, and an excellent vapour barrier, can be applied to concrete and screed 7 days after placement. Material: Damp Tolerable Primer for Non-Porous Surfaces. Shape: Form - Two component: Low viscosity epoxy resin. |