Damp tolerable primer for non-porous surfaces.
Priming of damp, non-porous concrete and screed to provide a DPM and vapour barrier, prior to the application of moisture sensitive flooring, coatings, membranes, levelling compounds and screed. Areas of application include:
Two-part, solvent free, damp tolerable, coloured, epoxy based primer which is applied to non-porous surfaces as a barrier to residual substrate moisture and vapour within concrete and screeds. For porous substrates, Newton 901-P should be applied first to seal the surface and remove the porosity.
The high quality, low viscosity epoxy formulation allows for application onto damp surfaces, allowing for the speedy application of flooring, coatings, membranes, levelling compounds and screeds to damp substrates. Newton 902-P is quick and simple to use and can be applied over cementitious screeds and concrete just seven days after placement. It is applied by brush or roller in two different coloured, gloss coats, or one coat if applied above Newton 901-P - consult manufacturer for details.
Features and benefits:
Applications:
Priming of damp, non-porous concrete and screed to provide a DPM and vapour barrier, prior to the application of moisture sensitive flooring, coatings, membranes, levelling compounds and screed. Areas of application include:
- Suitable substrates:
Indoor or outdoor floors of correctly formed, compacted and prepared:
Uniclass 2015 | |
CAWS | C42/310 Repair mortar J10/110 Proprietary mortar J30/110 Cold applied tanking . . . . . . J31/110 Cold deck roof coating J31/120 Warm deck roof coating J31/130 Inverted roof coating J31/353 Waterproof coating J40/290 High density polyethylene/ polypropylene studded cavity drain membrane J40/295 Geocomposite studded cavity drainage/ venting membrane J40/47 High density polyethylene/ polypropylene studded cavity drain membrane |
Product Reference | Newton 902-P |
Colour | Green (RAL 6010)Yellow (RAL 1005) |
Standard product features | Form (two component): Low viscosity epoxy resin. Weight: 5.2 kg. Technical characteristics: - General:
- Drying:
- Cured membrane:
|
Product Options | Colour: RAL Colour is based on the paste and is not the exact finished colour. Other colours are available on request but will be subject to lead time and minimum order quantity - consult manufacturer for further details. |