A two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water impermeable HDPE (high density polyethylene) drainage membrane.
Newton 410 GeoDrain is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water impermeable high-density polyethylene (HDPE) drainage membrane.
The Newton 410 GeoDrain provides drainage and protection to the outside face of basement walls to sloping sites, preventing the build-up of water pressure and protecting the structure from aggressive water, chemicals and toxins, and provides mechanical protection only when used against the ‘Type A’ waterproofing where the site is not sloping and so where ground water removal is not viable or recommended.
Consult manufacturer's literature for relevant installation information.
Features and benefits:
Studded core: Black, Geotextile: White
11.3 x 1250 x 2000 mm
J40/295 Geocomposite studded cavity drainage/ venting membrane
Newton 410 GeoDrain (M18)
CE marked, and manufactured in accordance with EN 13252: 2016
High density polyethylene (HDPE)
Third party product certification
To EN ISO 12958, BS 6906-3, EN ISO 25619-2, BS EN 1931, EN ISO 10319 and to EN 14030/ EN ISO 13438
20 kPa: 4.60 L/m²/s
Vicat softening temperature (Studded core)
Packaged weight (GeoDrain)
-40 to +80 °C
Thickness at 2kPa
Water flow (in plane)
Water flow through geotextile
Compressive strength – Temporary loading
Water vapour diffusion resistance – Sd value
Water vapour diffusion resistance – µ value
Water vapour diffusion resistance
Tensile strength (Machine direction)
Tensile strength (Cross direction)
Chemical resistance – Excellent
Oxidation resistance – Excellent
Standard product features
Studded core: Black, Geotextile: White.
Assists in moving water around and downhill of the structure to prevent water pressure build up. Resistant to all chemicals normally found in the ground. Withstands stresses, allows for backfilling and strong material with high compressive strength. Suspended soil particles (fines) are filtered out by the geotextile layer, quick and easy to install with a range of ancillary fixing and installation products and CE marked and manufactured in accordance with EN 13252: 2016.
Non-woven geotextile layer.
Studded core: High density polyethylene (HDPE), Geotextile: Polypropylene.
Two-core drainage sheet.
11.3 mm thickness at 2 kPa (Installed Performance) x 12 500 length x 2000 mm width.