NBS Source
I'm a manufacturer
Compare variants

Net2 Proximity Keypad - KP75

Verified by manufacturer 2 months ago

Proximity keypad - KP50 (355-110)

Paxton Access Ltd Variant:
Third party certifications:
  • UL Listed

    UL Listed

    Certificate type

KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems.

Jump to:
BOS
+44 (0)1273 811011 Website

Application

Installation – The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.


Operation – A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.

Description

The K series readers are supplied with black bezels that can be fitted in the final stages of installation. Replacement bezels are available in black and white/grey, and are free of charge to Paxton registered installers from the Extranet.


The KP50/KP75/KP75 Screw connector keypad readers are RFID/ Keypad combinations devices that offer the convenience of contactless authentication, or the added security of PIN/Prox entry, for system users. They are available for use with both Switch2 and Net2 systems The readers are supplied with a choice of black or white covers/ bezels. The reader is wired as shown on the control unit label. The 75 Series variant is also optionally available with a screw connector version making cabling even simpler. Note: Be sure to avoid mounting proximity readers on metal surfaces or near other proximity readers as this will affect the read range. A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. The control unit verifies the information and grants or denies access as appropriate. By default, all 3 LEDs are lit. If access is granted, the green LED flashes. An audible tone is emitted. When using Token + PIN, the Amber LED will flash after the token has been presented, indicating the need to enter a PIN. If an incorrect PIN is entered, access is denied and the red LED flashes. An audible tone is emitted. Using PIN ONLY, incorrect PIN’s will not return an access denied response


Features and benefits:

  • Wall mounted.
  • The readers are supplied with a choice of black or white bezels.
  • The 75 Series variant is also optionally available with a screw connector version making cabling even simpler.
  • A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. The control unit verifies the information and grants or denies access as appropriate.
  • By default, all 3 LEDs are lit. If access is granted, the green LED flashes. If access is denied, the red LED flashes.’ An audible tone is emitted in both cases.

General information

Color

Black

White

Other

Guidance for specification option:

Additional coloured covers available. Contact manufacturer for details.

Material

Plastic

Shape

Rectangle

Length

100 mm

143 mm

Width

50 mm

75 mm

Height

15 mm

16 mm

Warranty description

Five year

Uniclass

Ss_75_40_02_11 Card access control systemsPrimary

CAWS

W90/362 Keypads

W90/130 Electronic access control system

W90/363 Access control units

Product range

Net2
Net2 Readers

Specification data - Card access control systems

System supplier

Paxton Access Limited.

System type

Networked stand-alone door controller.

Equipment interconnectivity

Wired access control unit linking to readers and ancillary components; wireless data connection between access control units and proximity devices.

Method of authorization

Active proximity devices,
PIN codes.

Readers

Proximity card readers.

Controls

Access control units.

Operating voltage

10–14 V d.c..

Current

180 mA.

Operating temperature

35–66°C.

Cable length

5 m.

Extension

≤25 m (Belden 9538).

≤100 m (Belden 9540).

Moisture resistance

IPX7.

Dimensions

15 x 50 x 100 mm.

Guidance for specification option:

H x W x L

Sustainability data

Country of product manufacture

United Kingdom

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
IFC
-

1

Revit
-

1

Third party certifications

UL Listed

UL Listed

UL 294 - Access Control System Units CSA C22.2 No. 205 - Signal Equipment - Net2 ACU and readers

Literature

Net2 Proximity Keypad, KP75 - data sheet

Net2 Proximity Keypad, KP75 - data sheet

Net2 Proximity Keypad, KP75 - instructions

Net2 Proximity Keypad, KP75 - instructions

Similar products from Paxton Access Ltd

Entry - Audio Monitor

Entry - Audio Monitor

Entry - Premium Monitor

Entry - Premium Monitor

Entry - Standard Monitor

Entry - Standard Monitor

Entry - Standard Panel

Entry - Standard Panel

Entry - Touch Panel

Entry - Touch Panel

Entry - VR Panel

Entry - VR Panel

Entry monitor  - Desktop Stand

Entry monitor - Desktop Stand

Net2 Air Bridge

Net2 Air Bridge

Net2 Desktop Reader - USB

Net2 Desktop Reader - USB

Net2 I/O Board 12V 2A PSU, Plastic Cabinet

Net2 I/O Board 12V 2A PSU, Plastic Cabinet