Verified by manufacturer 18 days ago
BBA Agrément Certificate
Certificate type
PVC single ply membrane warm roofing systems.
Protan SE can be used in a warm roof construction over appropriate thermal insulation, such as Paratherm F foil faced polyisocyanurate (PIR) insulation or mineral wool.
Protan EX-A can be used in a warm roof construction over appropriate thermal insulation, such as Paratherm G tissue faced polyisocyanurate (PIR) insulation or mineral wool.
Protan G can be used in a warm ballasted roof construction over appropriate thermal insulation, such as Paratherm polyisocyanurate (PIR) insulation or mineral wool (subject to loadings). Protected with stone ballast, concrete paving or green roofs.
PVC single ply membrane warm roofing systems which include the following membrane options:
Protan SE:
Protan EX-A:
Protan G:
British Board of Agrement (BBA) certified, CE marked.
Color | Grey Guidance for specification option: Light or dark grey. |
Material | PVC Plastic |
Length | 20000 mm Guidance for specification option: MOY Protan SE/ MOY Protan EX-A 7500 mm Guidance for specification option: MOY Protan G 1.5 mm 150000 mm Guidance for specification option: MOY Protan G 1.5 mm |
Width | 1000 mm 2000 mm |
Warranty description | 15 year 20 year 25 year Manufacturer guidance
|
Uniclass | |
CAWS | J42/10 Warm deck roof covering J42/110 Warm deck roof covering |
Preparation | |
Horizontal work | MOY SA Primer L.Guidance for specification option: Primer required for self-adhesive products only. MOY SA Spray Primer.Guidance for specification option: Primer required for self-adhesive products only. Not requied. |
Skirtings and vertical work | MOY SA Primer L.Guidance for specification option: Primer required for self-adhesive products only. MOY SA Spray Primer.Guidance for specification option: Primer required for self-adhesive products only. Not required. |
Air and vapour control layer | |
Type | MOY PE AVCL.Guidance for specification option: Loose laid and only suitable when the insulation is mechanically fixed. MOY Sticker Sanded 3 mm.MOY Sticker Sanded AL (Foilcore).MOY Sticker Helast VB 500 SA.MOY Elotene DSN SA.Manufacturer guidanceAVCL is either loose laid or self adhesive (SA). For bonded insulation a self-adhesive AVCL should be specified. For high humidity buildings (>Class 3 to BS 5250) a foil lined or foil faced product should be used. |
Attachment | Loose laid.Self adhesive (SA). |
Insulation | |
Type | MOY Paratherm F PIR insulation, tapered.Guidance for specification option: Insert requirements including required fall:
Paratherm F™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board, offering a low thermal conductivity of 0.022 W/m·K. It is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. MOY Paratherm F PIR insulation, uniform.Guidance for specification option: Insert requirements:
Paratherm F™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board, offering a low thermal conductivity of 0.022 W/m·K. It is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. MOY Hardrock Multi-Fix DD, tapered.Guidance for specification option: Consult manufacturer for details and insert requirements including required fall. MOY Hardrock Multi-Fix DD, uniform.Guidance for specification option: Consult manufacturer for details and insert requirements. MOY Paratherm G PIR insulation, tapered.Guidance for specification option: Consult manufacturer for details and insert requirements including required fall. Board sizes (l x w x t):
Paratherm G™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board and is suitable with MOY’s fully adhered single ply, partially bonded built-up felt and cold liquid applied waterproofing (with carrier membrane) systems. MOY Paratherm G PIR insulation, uniform.Guidance for specification option: Consult manufacturer for details and insert requirements. Board sizes (l x w x t):
Paratherm G™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board and is suitable with MOY’s fully adhered single ply, partially bonded built-up felt and cold liquid applied waterproofing (with carrier membrane) systems. |
Attachment | MOY PU insulation adhesive.MOY PU spray-applied insulation adhesive.MOY tube fasteners.Loose laid.Guidance for specification option: Loose Laid if ballasted immediately (Paratherm G or Paratherm F). |
Waterproof covering | |
Type | MOY Protan EX-A 1.5 mm.MOY Protan G 1.5 mm.MOY Protan SE 1.2 mm.MOY Protan SE 1.6 mmMOY Protan SE 1.8 mm |
Attachment | MOY Tube Fasteners.Guidance for specification option: For MOY Protan SE 1.2 mm / 1.6 mm / 1.8 mm. MOY Fleece-backed Membrane Spray Adhesive.Guidance for specification option: For MOY Protan EX-A 1.5 mm. MOY FB Membrane Adhesive.Guidance for specification option: For MOY Protan EX-A 1.5 mm. Loose Laid.Guidance for specification option: For MOY Protan G 1.5 mm. |
Upper protection layer | MOY VLU 300 Protection Layer.Guidance for specification option: To be used with MOY Protan G 1.5 mm only. |
Surface protection | Manufacturer guidanceFor MOY Protan G 1.5 mm only: Suitable ballast finish (by others) - 50 mm thick concrete paving / 50 mm thick 20-40 mm rounded stone ballast / green roof. |
System accessories | Walkways.MOY RWOs.MOY (PVC) laminated metal trims.Termination bars.Mechanical fixings.Pre-formed corners.Omega profiles.MOYLITE rooflight(s).Manufacturer guidanceConsult manufacturer for details and insert further requirements as necessary. |
Contains Red List materials | Yes |
Country of material origin | Norway |
Country of product manufacture | Norway |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | Manufacturer guidanceSynthetics generally: 120 MJ/kg (University of Bath) |
Recyclability | The by-products of the manufacturing process could be recycled internally. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 6 % |