Monodraught Square Sunpipe | Square Sun Tunnel Kit - Rooflights, Daylight Pipes

The Monodraught Square Sun Tunnel System incorporates a sealed double glazed unit with an outer layer of 3 mm clear float glass, an 8 mm air gap and 3 mm clear float inner glass.

Monodraught Square Sun Tunnels are a way to harness natural daylight from rooftops into interiors to brighten dark rooms and underground spaces. The Monodraught sun pipes are suited to almost any application, and have been installed anywhere from residential bedrooms to large commercial properties.

All Monodraught sunpipe systems are guaranteed for ten years.

Smaller sizes have a recommended total maximum pipe length of 8 m. Larger sizes allow for longer lengths to be used. There is a 12% reduction of light output for each 45° bend used and there is a 6% reduction in light transmission for every metre of SUNPIPE.

30° & 45° adjustable elbows can be used with all SUNPIPE applications to direct daylight to where it is required.

Features and benefits:

• Directs sunlight into a room from roof level by transferring it through a physical vapour deposition (PVD) coated, mirror-finished, anodized aluminium tube to maximize reflections and limit light diffusion.
• Boost levels of Dopamine, Endorphins, Cortisone and Vitamin D.
• 20% increase in employee output when installed within office environments.
• Incorporates a sealed, double-glazed unit with an outer layer of 3 mm clear float glass, an 8 mm air gap and 3 mm clear float inner glass.
• Suitable for brightening dark rooms and underground spaces.

Components:

• Square rooflight frame, with square-to-circular transition piece and cover unit. Finishes flush with the roof surface. Supplied with code 4 lead flashing for suitable weathering.
• 45° adjustable elbow (0.5 mm). Coated with MIRO SILVER® 27/427OAG. Creates an offset to the pipe (i.e. to deviate course). Can be rotated to achieve different angles.
• Plain end pipe (610 mm, 0.5 mm-thick). Coated with MIRO SILVER® 27/427OAG.
• Plywood backing plate (4 mm). Helps to mark out the opening at ceiling level and provides additional structural fixing for the diffuser.
• Ceiling extension (250 mm, 0.5 mm-thick). Provides a permanent joint between the diffuser and end pipe. Coated with MIRO SILVER® 27/427OAG.
• Double-glazed MicroPrism ceiling diffuser. Offers high thermal performance whilst ensuring maximum spread of natural daylight. White finish.
• Installation pack contains silicone sealant, screws, sealed rivets, neoprene washers, brushed nylon condensation seal, aluminium tape and universal installation instructions.