Modena Fencing

Name: Modena Fencing
Brand: jNPTBSDNacdDyrmeUu9vMb
SKU: NNCAbG5CybaFQua6t3kWv

Lang+Fulton

A railing fence with contemporary styling for boundary applications.

Jump to:

+44 (0)131 441 1255 www.langandfulton.co.uk

Description

Modena is a contemporary railing fence with a stylish appearance for boundary applications.

The fence panels are manufactured to a modular format from two or three pairs of carbon steel horizontal flat bars which are electrofused to vertical pales.

Fences up to 2000 mm have 12 mm solid bar pales which are attractively domed at top and bottom and 25 x 6 mm horizontal rails.

Fence heights greater than 2000 mm have 20 mm diameter CHS vertical pales and 40 x 6mm horizontal rails.

Single leaf, double leaf, pivot, cantilevered or sliding gates are manufactured to match with Modena infill. Optional entry/ exit controls can be supplied for restricted access with automatic activation in the event of fire alarm.

Railing fences are supplied in accordance with BS 1722-9.

Panels and posts are supplied galvanized and powder coated in a matt mica grey for a gun-metal finish as standard. Alternatively any RAL colour is also available.

General information

Finish	Hot dip galvanized and polyester powder coated in gun metal mica grey To BS EN ISO 1461 and BS 1722–16. Hot dip galvanized and polyester powder coated Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.
Material	Electrofused steel S235JR
Uniclass 2015	Ss_25_15_60_55 Metal post and panel barrier systemsPrimary
CAWS	Q40/30 Proprietary fencing Q40/340 Steel vertical bar fencing

Specification data - Metal post and panel barrier systems

Product Reference	Modena Fencing
Panel	-
Height	1000 mm 1200 mm 1500 mm 1800 mm 2000 mm 2400 mm 2700 mm 3000 mm
Width	1985 mm Post centres: 2000 mm, for fences up to 2000 mm high. 2421 mm Post centres: 2500 mm, for fences above 2000 mm high.
Posts	-
Straight/ Corner section	50 mm CHS For panel heights: 1000, 1200 or 1500 mm. 60 mm CHS For panel height: 1800 mm. 76 mm CHS For panel height: 2000 mm. 89 mm CHS For panel height: 2400 mm. 114 mm CHS For panel height: 2700 or 3000 mm.
Fixing	For anchoring within wall pockets For ground fixing Off-set over top of wall With base plates for fixing to a concrete foundation
Finish	Hot dip galvanized and polyester powder coated in gun metal mica grey To BS EN ISO 1461 and BS 1722–16. Hot dip galvanized and polyester powder coated Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.

Standard product features

Material:

Electrofused steel S235JR.

Fixing:

The horizontal flats of the panels are shaped at the ends to fit into slots on the post. A stainless steel pin inserted at the top of the post locks the panel in place.

Alternative fixing designed for sloping sites or un-even ground connects the panel to post with self-threading screws.

Orientation:

Fences are designed with the round bars set to the outside of the enclosed area.

Installation:

Fastenings: Panels fixed to posts with 3 mm stainless steel pins or M8 Self threading screw.

Groundwork: Refer to BS 1722 giving consideration to existing ground conditions. Posts to be set in holes 300 to 400 mm square in plan and between 550 and 700 mm in depth, depending on fence height. Holes should be completely filled to a minimum of 50 mm below ground level with concrete mix (minimum strength of C20).

Height from ground: Panels to sit 100 mm (maximum) off the ground.

Changes in level: Fence panels stepped to 150 mm (maximum) on standard length post. Post centres to be reduced for steeper gradients (between 1:20 and 1:7).