NBS Source
List your products
Description

The Micro range is characterized by closely spaced horizontal flat bars which are then fused to attractive plain round vertical bars.

The narrow spacing between the flat bars makes it a particularly good choice for ground or roof-top plant housing, cladding or any grating project where some degree of visual screening is required.

Framed panels are made to custom-sizes and provide security, natural daylight and ventilation.

There are three products within the Micro range:

  • Micro-15 with an aperture size (w x h): 76 x 15 mm.
  • Micro-25 with an aperture size (w x h): 76 x 25 mm aperture (w x h).
  • Micro-34 with an aperture size (w x h): 100 x 34 mm aperture (w x h).

The standard flat bar is 25 mm deep but a wider section can be supplied for a more distinctive appearance and increased level of screening.

Panels and ancillary steelwork can be supplied galvanized only or galvanized and powder coated to any RAL colour.

General information
Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS EN 13438.

Material

Electrofused steel S235JR

Uniclass 2015
Facade-aligned brise soleil systems (Ss_25_50_45_30)Primary
Specification data - Facade-aligned brise soleil systems
Product Reference

Micro

Panel -
Panel Type

Micro-15

25 x 2 mm bearing bar. Alternative bearing bars: 25 x 3, 30 x 2, 30 x 3, 40 x 3 or 50 x 3 mm. Panel size (w x h, maximum): 4000 x 1000 mm.

Micro-25

25 x 2 mm bearing bar. Alternative bearing bars: 25 x 3, 30 x 2, 30 x 3, 40 x 3 or 50 x 3 mm. Panel size (w x h, maximum): 4000 x 1200 mm.

Micro-34

25 x 3 mm bearing bar. Panel size (w x h, maximum): 4000 x 1543 mm.

Micro-34 with 30 x 2 mm bearing bar

Optional, special order.

Micro-34 with 30 x 3 mm bearing bar

Optional, special order.

Panel size

Bespoke, fabricated to custom size by Lang+Fulton. Large structural openings are covered by an arrangement of panels.

Fixing

Through holes in the framing bar

Through plates welded behind the horizontal flat bars

Through plates welded between the horizontal flat bars

Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS EN 13438.

Other requirements

None

Shaped to suit non-uniform openings

Rolled to a radius

Standard product features

Material:

Electrofused steel S235JR.

Framing:

Panels are framed at both sides with flat bars.

Orientation:

Panels are designed with the round bars set to the inside of the enclosed area.

Product Options

Panel:

Three options available, also Micro-34 alternatively available using bearing bars 30 x 2 or 30 x 3 mm (minimum quantity 400 m²).

Fixing:

There are three alternative fixing methods with a minimum of four fixing points per panel:

  • Through holes in the framing bar.
  • Through plates welded between the horizontal flat bars.
  • Through plates welded behind the horizontal flat bars.

Finishing:

Polyester powder coating is a multi-stage process which applies thermo-setting resins producing a superior finish to painting.

Other requirements:

- Bespoke designs:

The integrity of the raw material allows it to be cut or shaped to suit non-uniform openings or rolled to a radius.

Secondary steelwork:

Secondary support steelwork is designed and supplied as required.

Literature
Similar products from Lang+Fulton