NBS Source
I'm a manufacturer
Compare variants

MARISEAL® 250 SYSTEMS_BBA - Liquid-applied Roof Waterproofing

Verified by manufacturer 10 months ago

System 1

MARIS POLYMERS S.M.S.A Variant:
Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • EPD

    EPD

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

  • European Technical Approval (ETA)

    European Technical Approval (ETA)

    Certificate type

Liquid-applied BBA-approved roof waterproofing for new and existing flat or pitched roofs, and on flat roofs with pedestrian access.

Jump to:
+30 22620 32918-9 Website

Application

Liquid-applied roof waterproofing for new and existing flat or pitched roofs, and on flat roofs with pedestrian access.


Can be used with the following substrates:

  • Concrete; mortar; ceramic; insulation; steel; EPDM and bituminous waterproofing membranes.


Decks to which the system is to be applied must comply with the relevant requirements of BS 6229:2018.

Description

Liquid-applied roof waterproofing for new and existing flat or pitched roofs, and on flat roofs with pedestrian access.

BBA approved, certificate 17/5443.


Comprises:

  1. Primer, either:
  2. MARISEAL® 710, a solvent-based polyurethane for porous substrate penetration;
  3. MARISEAL® AQUA PRIMER, a water-based two-part epoxy primer for porous and non-porous substrate penetration; or
  4. MARISEAL® TPO PRIMER, a transparent solvent-based one-component adhesion promoter.
  5. MARISEAL® 250, a cold-applied and cold curing, one-component polyurethane membrane based on elastomeric hydrophobic resins. Used for base and second coat.
  6. MARISEAL® Katalysator, an accelerating additive for use with MARISEAL® 250.
  7. MARISEAL® FABRIC, a non-woven polyester reinforcement (not applicable for systems <1 mm thick).
  8. MARISEAL® 400, a one-component liquid-applied roof waterproofing based on aliphatic polyurethane.

General information

Color

White

Grey

Guidance for specification option:

Light grey.

Red

Other

Guidance for specification option:

Bespoke.

Material

Polyurethane (PUR)

Water-based

Solvent-based

Shape

Formless

Uniclass

Ss_30_40_30_40 Liquid-applied cold roof covering systemsPrimary
Ss_30_40_30_43 Liquid-applied warm roof covering systems

CAWS

J31/5 Cold deck roof coating

J31/120 Warm deck roof coating

J31/110 Cold deck roof coating

J31/10 Warm deck roof coating

Specification data - Liquid-applied cold roof covering systems

System performance

High performance waterproofing system.

Preparation

-

Horizontal work

MARISEAL® 710.

Guidance for specification option:

A solvent-based polyurethane for porous substrate penetration.

Coverage rate: 200 g/m² in one layer.

MARISEAL® AQUA PRIMER.

Guidance for specification option:

A water-based two-part epoxy primer for porous and non-porous substrate penetration.

Coverage rate: 100–200 g/m² in one or two coats.

MARISEAL® TPO PRIMER.

Guidance for specification option:

A transparent solvent-based one-component adhesion promoter that activates EPDM membranes.

Coverage rate: 5–60 g/m².

Skirtings and vertical work

As Horizontal work.

Liquid-applied waterproofing

-

Type

Base coat: MARISEAL® 250, 1.2 mm thick.
Second coat: MARISEAL® 250, 1.2 mm thick (over reinforcement).

Guidance for specification option:

The second layer should be applied 12–18 hours after the base coat and no later than 48 hours after the initial coat.


Application can be by brush, roller or airless spray. Brush application is normally only used for small roof areas and for embedding the reinforcement into the waterproofing.

Consult manufacturer's literature for detailed preparations requirements.

Manufacturer guidance

Specify visible colour (second coat) below - see Top colour.

Reinforcement

MARISEAL® FABRIC, 110 g/m².

Guidance for specification option:

A non-woven polyester reinforcement.

System accessories

MARISEAL® Katalysator.

Guidance for specification option:

An accelerating additive used with MARISEAL® 250.

Top colour

White.

Light grey.

Manufacturer guidance

MARISEAL® 250.

System thickness

1.6 mm.

Guidance for specification option:

Finished thickness.

Fire performance

F ROOF.

Reaction to fire

Euroclass E.

Resistance to wind load

≥50 kPa.

Performance characteristics

Categorization by:
· Working life: W2 (ten years).
· Climatic zone: M (moderate) and S (severe).
· Imposed loads: P3.
· Roof slope: S1 (<5%) to S4 (>30%).
· Surface temperature, lowest: TL3 (-20°C).
· Surface temperature, highest: TH4 (90°C).

Manufacturer guidance

Consult BBA certificate for further details.

Third-party certification

BBA 17/5443.
European Technical Approval ETA-21-0248.
Environmental Product Declaration (EPD), registration number S-P-07978 (solvent based).
Environmental Product Declaration (EPD), registration number S-P-07976 (Mariseal 250).

Sustainability data

Third party certifications

BIM objects

Platform Compatible Version
Revit
 -

1

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

BBA certification 17/5443

EPD

ENVIRONMENTAL PRODUCT DECLARATION MARISEAL® 250

EPD

ENVIRONMENTAL PRODUCT DECLARATION SOLVENT-BASED

EPD

EPD

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001

European Technical Approval (ETA)

European Technical Approval (ETA)

Mariseal 250 / Flash systems ETA-05-0197

European Technical Approval (ETA)

European Technical Approval (ETA)

ETA MARISEAL 250 SYSTEM 21-0248

Literature

Maris brochure

Maris brochure

Build-ups-Mariseal 250-BBA-Flat roof and terraces-Fabric

Build-ups-Mariseal 250-BBA-Flat roof and terraces-Fabric

© 2024 NBS Enterprises Ltd. All rights reserved.