Mapeheat Mesh

Mapeheat Mesh is a self-adhesive, pre-wired, floor-heating mesh that can be adhered onto the subfloor during the layout process. Its compatibility with all subfloor types and its low profile (4.5 mm) makes it suitable for renovation projects.

The mesh can be installed under ceramic tile, porcelain tile, natural stone, laminate flooring, engineered wood flooring and luxury vinyl flooring. The heating cable is attached to the self-adhesive mesh layer by three mesh bands. These bands help to maintain consistent spacing of the cable while allowing easy removal of the cable during installation in hard-to-reach areas. Thanks to its twin coil design, the PVC-coated heating cable emits no measurable electromagnetic fields. Plus, the cable features a thin a thin mechanical splice and a thin, flexible, 13.05 m cold lead that is easy to embed in the subfloor and route to the themostat's location.

Features and benefits:

• Easy to install under tile, stone, laminate, engineered wood and luxury vinyl floors (90W only).
• Use with a self-leveller (recommended) or a polymer-modified adhesive.
• Can be configured on site to fit any room.
• Suitable for wet environments such as showers and steam rooms.
• Low-profile cold lead and splice joint. 
• Heating cable two-wire, grounded, twisted pair with PVC outer jacket.
• Cold lead two-wire, 16-18 AWG plus ground braid; length of 10 ft. (3.05 m).
• Operating voltage 230 V.