NBS Source
LTHW Underfloor Heating
Compare variants

Application

Suitable for fitting underneath floorboards to provide heating in residential and other applications.

Description

An underfloor heating system suitable for variety of flooring projects.


Features and benefits:

  • Can be operated through touch-screen thermastat or mobile app.
  • Structure of systems can accommodate being fitted underneath floor joists or alongside floor joints.
  • Fitted with Base™ PEX PIPEs and Base™ Nickel plated manifold to complete both systems.
  • Both systems fitted with heat diffusion plates that improve heat conductivity and increase system response.

General information

Material

Aluminium

Size

15-22 mm

Dependent on area heating load/ zone circuit size.

Uniclass 2015

Ss_60_40_92_94 Underfloor low-temperature hot water heating systemsPrimary

CAWS

T90/475 Underfloor heating systems

T90/475 Underfloor heating systems

M42/340 Underfloor heating

Specification data - Underfloor low-temperature hot water heating systems Enhanced data

Pipes

-

Distribution

Directly on floor joists.

Underfloor

Insulation layer, tongue and joist panel with joists.

Accessories

Heat diffusion plate.

Touch-screen thermastat.

PEX oxygen barrier pipe.

Finished floorboards.

Base™ PEX PIPEs.

Controls

-

Controllers

Touch-screen thermostat.

Operated through, wireless control, wifi or network.

Mobile app.

Operated through wifi or network. Suitable for Apple and Android platforms.

Sensors

Base™ Nickel plated manifold.

Floor components

Finished floor.

Engineered timber board.

6 mm.

Foil faced tape.

PEX pipe.

Tongue and groove panel.

Joist.

Insulation layer.

System completion

Pre-grooved flooring panels.

  • Pre-grooved flooring panels offer an alternative solution tc traditional flooring systems incorporating the underfloor heating pipework and structural floor in one panel.
  • Panel offering a low system build up from only 22 mm plus a 6 mm engineered timber board to cover.
  • Base™ flooring panel (1200 x 600 x 22mm) - flooring grade tongue and groove panel.

Pipework.

  • 16 mm pipework is tightly encased within pre-grooved channels with additional aluminium heat diffusion tape covering pipework ensuring additional system output and even heat distribution across floor.

System arrangement

Base™ STRUCTURAL IN-BOARD SYSTEM. PEX pipe installed to pre-routed (2400 x 600 x 22mm) tongue & groove panel.

Panel glued and screwed to 400 mm centre joists. 6mm engineered timber panel installed to tongue & groove panel.

Digital objects

Platform Compatible Version Certified to
Revit
-

1

2.1
IFC
-

1

2.1
Download now from NBS National BIM Library