Application

For use as a closed joint rainscreen panelized siding system.

Description

Longboard® Panelboard is an extruded aluminium closed joint rainscreen panelized siding system, designed to be installed horizontally or vertically. Planks are available in standard lengths of 24’ (7.3 m) and a single width of 6” (152.4 mm). Components used for perimeter terminations, corners and panel trims are available in 12’ (3.7 m) lengths for most, with some in 24’ (7.3 m) lengths.

Features and benefits:

  • High impact strength.
  • 100% recyclable, the extrusion does not contain any plastic elements.
  • Easy to maintain and cost-effective field repairs. Dirt and debris can be easily rinsed and washed off with a mild detergent depending on frequency of build-up. No caulking or glue is required for the product.
  • Rain-screen - BV/D (rear ventilated rain-screen), mechanical seals are used such as metal flashing and metal furring strips which are long-lasting.
  • Flatness.
  • Ease of installation.

Application:

For use as a closed joint rainscreen panelized siding system.

General information

Finish

Powder coated

Material

Aluminium alloy 6063-T5

Uniclass 2015

Pr_25_71_51_06 Aluminium traditional sheetsPrimary

CAWS

H72/130 Aluminium sheet fully supported wall covering

Specification data - Aluminium traditional sheets

Product Reference

Longboard® Panelboard

Colour

Insert requirement.

Accessories

None

¾” panelboard U-channel

¾” panelboard U-channel end sleeve

¾” U-cap and base

1-1/2” U-cap and base

1-1/2 panelboard U-channel

1-1/2” panelboard U-channel end sleeve

End trim snap-cap

Finish cap/ finish base

J-Track

Quick screen clip

Single piece inside corner

Single piece outside corner

Starter

Two-piece reversible corner

Standard product features

Profile:

152.4 mm (6").

Length:

7315.2 mm (24 ft).

Thickness:

1.52 mm (base metal thickness).

Material:

Aluminium alloy 6063-T5.

Finish:

Powder coated.

Gloss:

30 (±5).

Fixing:

Components are hard-fastened every 16” (406mm) directly through the flange. Planks are secured using Longboard Quick-Screen Clips fastened to the substrate with screws. , #8 pan-head self-drilling screws (not included) are recommended.

Similar products from Longboard Products