LIPVS30 Liquid Waterproofing Membrane

LIP VS30 is a one-component liquid membrane used for waterproofing floor and wall cladding before cladding with ceramic tiles or natural stone in wet rooms. To be used with Primer 54 or Supergrund and reinforcement tape.

Features and benefits:

• Approved for radon protection.
• EC1 Plus approved.
• TGA and ETAG 022 approved for wet rooms.
• Easy to apply.
• Crack bridging.
• 1–2 hour drying time (1st layer); 8–16 hours (2nd layer).
• Seven day drying time needed before water load.
• Ready for tiling after 8–16 hours at 20°C.
• Flexible and designed to stretch and move with buildings.
• Very low emissions and CO2-neutral manufacturing.
• Suitable for DGNB and Nordic Ecolabelled buildings.
• Available in 3 kg and 12 kg buckets.

In the areas where a layer thickness of at least 1 mm is required, consumption is 1.73 kg/m². This applies in accordance with applicable building regulations, SBI instructions. In the areas where only a waterproof layer is required, the layer thickness must be a minimum of 0.58 mm at a consumption of 1 kg/m². For radon protection, a minimum application of 1.0 mm.

The substrate must be dust-free, firm, dry and free of release agents. Cement, plaster, lightweight clinker concrete, screed, gypsum plaster, plaster floors, aerated concrete and other inorganic materials are primed with LIP primer 54, diluted one-part primer and ten parts water.

Floor drains must be approved lubrication membranes on the respective substrates and the supplier's instructions must be followed.