NBS Source
List your products
LimePath Geo SuDS UV
Application

Suitable for both commercial and domestic pathways, nature walks and general pedestrian areas.

Description

An ultraviolet (UV) stable resin bound surfacing system which is installed at 30/ 40 mm depth onto a 4 mm high performance triple layer system of geotextiles and a stabilisation geonet. This system reduces the need for a binder courses such as concrete and asphalt concrete (macadam) whilst still providing high permeability and strength.

The structure allows rainwater to pass through being sustainable urban drainage systems (SuDS) compliant. With permeability rates of up to 850 L/m²/m. The product has a triple lock stabilization layer which is thermally bonded on both sides to provide excellent drainage and filtration whilst helping to stabilize the decorative UV Resin Bound surface layer and Sub-base. Available in a variety of colours. Coverage rates for individual blends can vary (consult manufacturer for details).

All LimePath GeoSuDS UV aggregate blends have been tested for slip resistance in wet and dry conditions. Anti-slip aggregate broadcast onto the surfacing during installation will significantly increase the slip resistance of the surface in the wet and on steep gradients without substantial change to appearance.

The system is designed for foot traffic and after consultation occasional vehicle access traffic such as light infrequent maintenance vehicles or pedestrian two wheel mode of transportation.

Resin and aggregate:

LimePath GeoSuDS UV resin is UV resistant and will not yellow on exposure to UV light. This is a more attractive option than some other types of resin which can yellow and dramatically alter the appearance of the finished surface. The resin is formulated using aliphatic HDI which will not deteriorate or become brittle when exposed to UV light when tested to BS EN ISO 16474-3 method A The performance and appearance of the finished surface is dependent on the aggregate used (see LimeGate Solutions LimePath GeoSuDS UV mix blend swatch sheet for colour options). The aggregate blends have been designed to achieve strength, resilience, porosity and decoration.

Mix design and pack sizes:

  • LimeBound resin bound surfacing resin 7.5 kg.
  • LimeBound resin bound surfacing aggregate 100 kg (four 25 kg bags).
  • LimeBound fine aggregate 6.25 kg.
  • GeoNet 2 m x 50 x 4 mm rolls (100 m²).

Features and benefits:

  • UV stable will not discolour or degrade.
  • Tested to slip resistant BS 8204-6.
  • SuDS compliant permeable paving 850 L/m²/minute.
  • Natural and recycled aggregate available.
  • 30/ 40 mm depth installs directly onto type 1 or 3.
  • Triple lock GeoNet to help base stabilization and water drainage.
  • All aggregates selected to reduce the chances of rust appearing.
  • Foot traffic after 14-15 hours at 20°C.
  • Made in the UK.
  • Manufactured UKAS ISO9001 in line with the guidance notes published by the Resin Bound Technical Committee as part of FeRFA: the Resin Flooring Association.

Application:

Suitable for both commercial and domestic pathways, nature walks and general pedestrian areas.

General information

Features

UV stable will not discolour or degrade

Tested to slip resistant BS 8204-6

SuDS compliant permeable paving 850 L/m²/minute

30/ 40 mm depth installs directly onto type 1 or 3

Triple lock GeoNet to help base stabilization and water drainage

Material

Resin and aggregate

Uniclass 2015

Ss_30_14_02_71 Resin-bound aggregate light-duty paving systemsPrimary

CAWS

Q23/225 Proprietary resin bound chippings

Specification data - Resin-bound aggregate light-duty paving systems Enhanced data

Product Reference

LimePath Geo SuDS UV

Geotextile below granular sub-base

Required

Not required

Granular sub-base

100 mm minimum well compacted Type 3 granular sub base or similar approved

Surface course

LimePath GeoSuDS UV surfacing, 10 mm aggregate minimum install depth: 30 mm. 4 mm triple layer thermal bonded GeoNet

Edge restraints

Required

Impermeable membrane

Not required

Required

Thickness

30/ 40 mm

Aggregate

Dior 10 mm

Espresso 10 mm

Honey gold 10 mm

Honey pebble 10 mm

Marscape 10 mm

Silver buff 10 mm

Woodland walk 10 mm

Standard product features

Colour:

Various. Refer to manufacturer mix bend sheets.

Features:

  • UV stable will not discolour or degrade.
  • Tested to slip resistant BS 8204-6.
  • SuDS compliant permeable paving 850 L/m²/minute.
  • 30/ 40 mm depth installs directly onto type 1 or 3.
  • Triple lock GeoNet to help base stabilization and water drainage.

Material:

Resin and aggregate.

Country of origin:

United Kingdom.

Third party certifications
  • FeRFA: UKAS ISO9001
Similar products from Limegate Solutions Ltd