QA Certificate
Certificate type
ECO friendly, SuDS Permeable, decorative resin bound UV surfacing.
Suitable for both commercial and domestic pathways, nature walks and general pedestrian areas.
An ultraviolet (UV) stable resin bound surfacing system which is installed at 30/ 40 mm depth onto a 4 mm high performance triple layer system of geotextiles and a stabilisation geonet. This system reduces the need for a binder courses such as concrete and asphalt concrete (macadam) whilst still providing high permeability and strength.
The structure allows rainwater to pass through being sustainable urban drainage systems (SuDS) compliant. With permeability rates of up to 850 L/m²/m. The product has a triple lock stabilization layer which is thermally bonded on both sides to provide excellent drainage and filtration whilst helping to stabilize the decorative UV Resin Bound surface layer and Sub-base. Available in a variety of colours. Coverage rates for individual blends can vary (consult manufacturer for details).
All LimePath GeoSuDS UV aggregate blends have been tested for slip resistance in wet and dry conditions. Anti-slip aggregate broadcast onto the surfacing during installation will significantly increase the slip resistance of the surface in the wet and on steep gradients without substantial change to appearance.
The system is designed for foot traffic and after consultation occasional vehicle access traffic such as light infrequent maintenance vehicles or pedestrian two wheel mode of transportation.
Resin and aggregate:
LimePath GeoSuDS UV resin is UV resistant and will not yellow on exposure to UV light. This is a more attractive option than some other types of resin which can yellow and dramatically alter the appearance of the finished surface. The resin is formulated using aliphatic HDI which will not deteriorate or become brittle when exposed to UV light when tested to BS EN ISO 16474-3 method A The performance and appearance of the finished surface is dependent on the aggregate used (see LimeGate Solutions LimePath GeoSuDS UV mix blend swatch sheet for colour options). The aggregate blends have been designed to achieve strength, resilience, porosity and decoration.
Mix design and pack sizes:
Features and benefits:
Application:
Suitable for both commercial and domestic pathways, nature walks and general pedestrian areas.
Features | UV stable will not discolour or degrade Tested to slip resistant BS 8204-6 SuDS compliant permeable paving 850 L/m²/minute 30/ 40 mm depth installs directly onto type 1 or 3 Triple lock GeoNet to help base stabilization and water drainage |
Material | Resin and aggregate |
Uniclass 2015 | |
CAWS | Q23/225 Proprietary resin bound chippings |
Product Reference | LimePath Geo SuDS UV |
Geotextile below granular sub-base | RequiredNot required |
Granular sub-base | 100 mm minimum well compacted Type 3 granular sub base or similar approved |
Surface course | LimePath GeoSuDS UV surfacing, 10 mm aggregate minimum install depth: 30 mm. 4 mm triple layer thermal bonded GeoNet |
Edge restraints | Required |
Impermeable membrane | Not requiredRequired |
Thickness | 30/ 40 mm |
Aggregate | Dior 10 mmEspresso 10 mmHoney gold 10 mmHoney pebble 10 mmMarscape 10 mmSilver buff 10 mmWoodland walk 10 mm |
Standard product features | Colour: Various. Refer to manufacturer mix bend sheets. Features:
Material: Resin and aggregate. Country of origin: United Kingdom. |