ECO friendly, SuDS permeable, decorative, resin-bound surfacing UV - no binder required.
Suitable for pathways.
LimePath EcoWalk UV is a combination of recycled rubber sourced from used vehicle tyres and natural aggregates, bound together with a specially formulated aliphatic HDI polyurethane resin, which will not deteriorate or become brittle when exposed to UV light when tested to BS EN ISO 16474-3 method A; see FeRFA guidance notes, 2020.
LimePath EcoWalk UV was developed to be a SuDS-compliant, permeable, resin-bound system that provides environmental benefits as a surface for pedestrian and low vehicular traffic, remaining slip-resistant, resistant to freeze-thaw, decorative, functional and seamless.
The environmentally designed open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The ‘no binder’ system eliminates the need for macadam and/ or concrete bases, reducing the impact of additionally sourced materials, and greatly reducing transportation and emission.
Edgings created from brick, stone, timber or steel should be installed to retain and protect the system.
Resin and aggregate:
LimePath EcoWalk UV system uses an ultraviolet (UV)-resistant polyurethane resin, and will not yellow on exposure to UV light. This is a more attractive option than some other types of resin, which can yellow and dramatically alter the appearance of the finished surface. The resin is formulated using aliphatic HDI, which will not deteriorate nor become brittle when exposed to UV light when tested to BS EN ISO 16474-3 method A; see FeRFA guidance notes, 2020.
The performance and appearance of the finished surface is dependent on the aggregate used (see Limegate Solutions LimePath EcoWalk UV mix blend swatch sheet for colour options).
The LimePath EcoWalk UV System Aggregate blends have been designed to achieve strength, resilience, porosity and decoration.
Features and benefits:
Manufactured UKAS ISO9001 in line with the guidance notes published by the Resin Bound Technical Committee as part of FeRFA: the Resin Flooring Association.
Suitable for pathways.
Tested to slip-resistant BS 8204-6
SuDS-compliant permeable paving: 850 L/m²/minute
Natural and recycled aggregate available
25 mm depth installation onto an existing concrete base
35/40 mm depth installation, directly onto type 1 or 3
Resin and recycled rubber and aggregate
Q23/225 Proprietary resin bound chippings
LimePath EcoWalk UV System
Geotextile below granular sub-base
150 mm minimum well-compacted type 3 granular sub-base or similar approved – SuDS-compliant (no binder course)
LimePath, 40 mm minimum depth
Dior 10 mm
Espresso 10 mm
Honey gold 10 mm
Honey pebble 10 mm
Marscape 10 mm
Silver buff 10 mm
Woodland walk 10 mm
Standard product features
Various. Refer to manufacturer mix blend sheets.
Resin and recycled rubber and aggregate.
>25%. Meets the environmental policy requirements to increase the use of recycled materials in excess of 50%.
Country of origin:
>25%. Meets the environmental policy requirements to increase the use of recycled materials in excess of 50%
© 2020 NBS Enterprises Ltd. All rights reserved.