LimePath EasiWalk UV System

A ‘no-dig/no-binder' system, which provides an ultraviolet (UV)-stable permeable system suitable for footpaths where there are access limitations for alternative sub-bases.

Installed at 40 mm onto a well-compacted and edged MOT type 1 or MOT type 3 base, LimePath EasiWalk UV creates a natural appearance whilst meeting SuDS (Sustainable Drainage Systems) requirements by allowing rainwater to be returned through its matrix to the ground, helping to prevent the risk of flooding. Using UV-stable polyurethane technology, the strength and resistance to UVA and UVB prolongs the performance, both in durable and visible terms.

Available in a variety of colours (see LimePath EasiWalk swatch sheet). Due to the use of high-performance, UV-stable resin protecting the stability of the natural colour from obvious change, the aggregate surface is widely specified across the UK in many forms. The aggregate blends have been designed to achieve strength, resilience, porosity and decoration.

Resin and aggregate:

LimePath EasiWalk UV system uses an Aliphatic UV-resistant resin, in line with the guidance notes published by the Resin Bound Technical Committee as part of FeRFA: the ResinFlooring Association.

Features and benefits:

• UV-stable; will not discolour nor degrade.

• Tested to slip-resistant BS 8204-6.

• SuDS-compliant permeable paving: 850 L/m²/minute.

• Natural and recycled aggregate available.

• 25 mm depth installation onto an existing concrete base.

• 35/ 40 mm depth installation, directly onto type 1 or 3.

• All aggregates selected to reduce the chances of rust appearing.

• Foot traffic after 14–15 hours at 20°C.

• LimePath EasiWalk UV is a specialist product, and must only be applied by specialist applicators.

• Manufactured UKAS ISO9001 in line with the guidance notes published by the Resin Bound Technical Committee as part of FeRFA: the Resin Flooring Association.

Application:

Suitable for footpaths where there are access limitations for alternative sub-bases.