NBS Source
List your products

Limelite Renovating Plaster

Third party certifications:
  • BBA Agrément Certificate

    Certificate type

Tarmac

Pre-blended, lightweight and fibre reinforced renovating plaster.

Jump to:
+44 (0)121 787 5001 www.tarmac.com
Application

Solid substrates such as brick, block and stone should be cleaned with any loose or friable materials removed. The plaster should be applied in coats between 7–15mm and a minimum of 24 hours is required between coats.

Description

Limelite Renovating Plaster is a pre-blended, lightweight and fibre reinforced renovating plaster that controls and manages moisture movement in traditional and damp buildings.

Features and benefits:

  • Breathable - can be applied directly to damp walls and substrates.
  • Can provide a fast and effective solution for flood remediation, heritage restoration and in both domestic and commercial properties.
  • Non-combustible to BS 476:4 and can be designated class O in accordance with the requirements of the national building regulations for use as a surface finishing material.
  • Can be used as a rapid drying, easy to apply alternative to traditional lime based plasters.
  • Compatible with both modern and traditional substrates including masonry, block, stone and wooden lath.
  • Prevents corrosion of metal fixtures such as angle beads and lath.
  • Provides a barrier to salt and efflorescence.
  • Mould resistant.
  • 24 hour drying time.
  • Contributes to the U-value of buildings.
  • Fibres reduce cracking and crazing.
  • Reduces condensation.
  • BBA certified.

Application:

Solid substrates such as brick, block and stone should be cleaned with any loose or friable materials removed. The plaster should be applied in coats between 7–15mm and a minimum of 24 hours is required between coats.

Mixing:

Should be mixed in a clean mixing vessel using a mechanical mixer such as a slow-speed drill and paddle mixer.

Should be stored in sealed original packaging in a dry location at temperatures between 5°C and 30°C. Avoid exposure to water, frost or heat as this will lead to a reduced shelf life.

General information
Specification data
Product Reference

Limelite Renovating Plaster

Standard product features

Weight:

25 kg.

Technical characteristics:

  • Thickness: 10–30 mm.
  • Dry powder density: 600 kg/m³.
  • Density air dried: 800 kg/m³.
  • Density oven dried: 725 kg/m³.
  • Compressive strength at 28 days: 3 N/mm².
  • Flexural strength at 28 days: 1.4 N/mm².
  • Modulus of elasticity: 2100 N/mm².
  • Appearance as supplied: Fine grey powder.
  • Appearance after application (dried): Light grey keyed finish.
  • Thermal conductivity (k) at 0% moisture by volume: 0.13 W/m°C.
  • Thermal conductivity (k) at 3% moisture by volume: 0.21 W/m°C.
  • Thermal resistance (R) at 13 mm and 3% moisture by volume: 0.058 m²°C/W.

Literature
Third party certifications
  • 91/2692 : Product Sheet 1
Similar products from Tarmac