NBS Source
List your products
LimeBound Resin Bound Surfacing UV
Application

Paths, driveways and car parks.

Description

LimeBound UV Stable Resin Bound System is a resin-bound aggregate surface for pedestrian and vehicular traffic which is permeable (SuDS, Sustainable Drainage System-compliant), decorative and functional, seamless and slightly flexible.

The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The surfacing may be applied to SuDS-compliant bases and sub-bases, reducing the impact of urban development on flood risk and allowing water to flow into watercourses. Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.

The system is a two-component mixture of the highest grade aliphatic and latest technology ingredients, which bind a range of selected decorative, kiln-dried aggregates. It provides an attractive porous surface, which is strong enough for foot and light vehicle traffic of up to 7.5 tonnes.

Resin and aggregate:

LimeBound Resin Bound Surfacing Resin is ultraviolet (UV)-resistant resin and will not yellow on exposure to UV light. The resin is formulated using aliphatic HDI, which will not deteriorate nor become brittle when exposed to UV light when tested to BS EN ISO 16474-3 method A.

The performance and appearance of the finished surface are dependent on the aggregate used (see LimeGate Solutions LimeBound mix blend swatch sheet for colour options). The aggregate blends have been designed to achieve strength, resilience, porosity and decoration.

Features and benefits:

  • Compressive and flexural strength testing to BS EN 13892-2.
  • QUV weathering chamber testing to BS EN ISO 16474-3 method A.
  • Slip resistance testing to BS 8204-6:2008+A1:2010, Appendix B.
  • Application to concrete/ asphalt concrete conforming to EN 13108-1, and hot-rolled asphalt conforming to EN 13108-4.
  • UV-stable; will not discolour nor degrade.
  • SuDS-compliant permeable paving: 850 L/m²/minute.
  • Natural and recycled aggregate available.
  • 15 mm depth installation for paths and drive-on/ drive-off driveways.
  • 18 mm depth installation for turning driveways/ car parks of up to 7.5 tonnes.
  • All aggregates selected to reduce the chances of rust appearing.
  • Optimized ratio of resin to aggregate mix blends, in line with industry standards (7%).
  • Foot traffic after 14–15 hours at 20°C.
  • Manufactured UKAS ISO9001 in line with the guidance notes published by the Resin Bound Technical Committee as part of FeRFA: the Resin Flooring Association.

Application:

Paths, driveways and car parks.

General information

Features

Compressive and flexural strength testing to BS EN 13892-2

UV-stable; will not discolour nor degrade

Optimized ratio of resin to aggregate mix blends in line with industry standards (7%)

Foot traffic after 14–15 hours at 20°C

Material

Resin and aggregate

Size

Dependent on required usage

Uniclass 2015

Ss_30_14_02_71 Resin-bound aggregate light-duty paving systemsPrimary

CAWS

Q23/225 Proprietary resin bound chippings

Specification data - Resin-bound aggregate light-duty paving systems Enhanced data

Product Reference

LimeBound Resin Bound Surfacing UV

Geotextile below granular sub-base

Required

Not required

Granular sub-base

150 mm minimum well-compacted type 1 granular sub-base or similar approved

Impermeable.

200 mm minimum well-compacted type 3 granular sub-base or similar approved

SuDS-compliant.

300 mm minimum well-compacted type 3 granular sub-base or similar approved

SuDS-compliant.

Base course

Refer to Limegate Solutions Ltd relevant base build up sheets.

Surface course

Resin-bound mixed aggregate surfacing

Edge restraints

Required

Thickness

15 mm

Pedestrian.

18 mm

Vehicle.

Aggregate

Select mix blend as required; consult manufacturer for details.

Standard product features

Colour:

Various. See manufacturer colour range.

Features:

  • Compressive and flexural strength testing to BS EN 13892-2.
  • UV-stable; will not discolour nor degrade.
  • Optimized ratio of resin to aggregate mix blends in line with industry standards (7%).
  • Foot traffic after 14–15 hours at 20°C.

Material:

Resin and aggregate.

Size:

Dependent on required usage.

Country of origin:

United Kingdom.

Third party certifications
  • FeRFA: The Resin Bound Technical Committee guidance notes 2021
Similar products from Limegate Solutions Ltd