NBS Source
I'm a manufacturer

Lime Inhibitor for Concrete Newton CDM 906 - Lime Inhibitor for Concrete

Verified by manufacturer 2 months ago

Newton Waterproofing Systems

Lime Inhibitor for concrete surfaces prevents the 'leaching' of free lime from the concrete. It is easy to use, and supplies long term durability.

Jump to:
+44 (0)1732 360095 Website

Application

Newton CDM 906 is typically applied...


  • For concrete floors newer than 12 months, apply to the whole slab or raft as well as the recess formed ready for CDM Basedrain or CDM Floordrain drainage conduits.
  • For concrete floors older than 12 months, apply to the recess cut into the concrete ready for CDM Basedrain or CDM Floordrain drainage conduits as well as 200 mm on either side of floor construction or movement joints.
  • For walls, apply 200 ml up the wall from the floor, or where a ‘kicker’ has been formed to a concrete wall, apply from the floor up to 200 mm above the kicker.
  • Underpinned properties require application to 200 mm either side of the joints. Dry-packed areas should be sealed with a cement based tanking product and the tanking treated with CDM 906 Lime Inhibitor.

Description

Lime Inhibitor For Application To Concrete Surfaces – Applied to concrete surfaces prior to the installation of a Newton cavity drain membrane waterproofing system to prevent the ‘leaching’ of free lime from the concrete.


Features and benefits:

  • Solvent and caustic-free.
  • Easy to use and handle.
  • Non-hazardous (on dilution).
  • Compatible with alkaline substrates.
  • Long term durability.

General information

Color

White

Finish

Smooth

Material

Liquid

Guidance for specification option:

Lime Inhibitor

Shape

Formless

Guidance for specification option:

Form - single component: Low viscosity liquid

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_66_67 Primer-sealersPrimary

CAWS

J40/335 Primers

Product range

Primers, Preparation and Reinforcement

Specification data - Primer-sealers

Composition

Solvent-free.

Specific gravity

1.02.

Weight

1.1 kg.

Yield – When mixed with 9 L of water

10.0 L.

Application rate – Open surface, porous concrete

0.2 L/m².

Application rate – Normal concrete

0.1 L/m².

Application rate – Power floated concrete

0.08 L/m².

Shelf life

12 months.

Application temperature

+5°C to +35°C.

Service temperature

-15°C to +80°C.

Odour

None.

VOC content

None.

Capacity

1 L.

Guidance for specification option:

Pack size (plastic container).

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Recyclability

0

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Literature

CDM 906 Lime Inhibitor TDS

CDM 906 Lime Inhibitor TDS

Case studies

Waterproofing the London School of Economics

Waterproofing the London School of Economics

Waterproofing Retaining Basements on a Sloping Site

Waterproofing Retaining Basements on a Sloping Site

Similar products from Newton Waterproofing Systems

Damp Tolerable Newton Epoxy Damp-proof Membrane - Damp Tolerable Epoxy DPM

Damp Tolerable Newton Epoxy Damp-proof Membrane - Damp Tolerable Epoxy DPM

Damp Tolerable, Vapour Barrier and Primer for Porous Services Newton Epoxy Primer - Damp Tolerable for Porous Surfaces

Damp Tolerable, Vapour Barrier and Primer for Porous Services Newton Epoxy Primer - Damp Tolerable for Porous Surfaces

Newton HydroCoat 903 Primer for Cementitious Waterproof Membranes - For Cementitious Waterproof Membranes

Newton HydroCoat 903 Primer for Cementitious Waterproof Membranes - For Cementitious Waterproof Membranes