NBS Source
I'm a manufacturer

Koster Sewer & Shaft Mortar - Waterproof Cement-based Render

Verified by manufacturer 5 months ago

Delta Membrane Systems Ltd

Waterproof cement based render that is chemically resistant, fast curing restoration mortar for sewers and shafts.

Jump to:
BOS
 +44 (0)1992 523523 Website

Application

Can be used for the watertight repair, renovation, and touch ups of sewer and shaft systems, as well as for levelling and filling of break-outs up to 3 cm per layer.

Description

Waterproof cement based render that is chemically resistant, fast curing restoration mortar for sewers and shafts.


Features and benefits:

  • A water tight, fast curing and fast setting restoration mortar for sewers and shafts.
  • Is fibre reinforced and develops a high compressive strength.
  • Can be applied below the waterline even under flowing water; as well as in drinking water environment.
  • Consumption: approx. 1.8 kg/L void as repair mortar; approx. 18kg/m²; per cm layer thickness.
  • Packaging: (C 590 025) available in 25 kg bag
  • Store the material in a dry environment. In originally sealed packages, the material can be stored for a minimum of 12 months.


Safety:

  • Wear protective gloves and goggles. Observe all governmental, state, and local safety regulations when installing the material.

General information

Color

Grey

Warranty description

Ten year

Uniclass

Pr_20_31_53_15 Concrete repair mortarsPrimary

CAWS

C42/310 Repair mortar

Specification data - Concrete repair mortars

Mortar type

Cement based.

Performance requirement class

R1.

Substrate

-

Manufacturer guidance

  • The surface has to be sound and solid, and free of oil and grease.
  • Contaminated substrates should be removed down to a contaminant free layer.
  • KÖSTER Sewer and Shaft Mortar is useable on all stable, hard mineral substrates.
  • Tiling must be removed. The substrate must be open pored.
  • When installing mortars substrate preparation is of vital importance.
  • Pre-wet all mineral substrates before installation.
  • The surface near pore structure must be saturated, (avoiding standing water and puddles) so that it does not absorb water from the applied mortar.

Application method

-

Manufacturer guidance

  • Mix 25 kg of KÖSTER Sewer and Shaft Mortar with 5.0 – 5.5 l water.
  • Place ¾ of the liquid into a mixing vessel of sufficient size and add the powder in portions while continually mixing with a slow rotating double paddle electrical mixer.
  • Add the remaining liquid as needed during mixing to adjust the mortar to the desired consistency.
  • Mix until a homogeneous, lump-free consistency is reached.
  • Minimum mixing time is 3 minutes.
  • The mortar has a pot life of approx. 20 minutes.
  • Apply KÖSTER Sewer and Shaft mortar using customary mason’s tools in one layer.
  • The minimum thickness for a water tight coat is 4 mm, maximum thickness is 3 cm per layer.

Performance:

-

Manufacturer guidance

  • Compressive strength: ≥ 10 MPa (Class R1).
  • Chloride ion content: ≤ 0.05 %.
  • Adhesive bond: 1.8 MPa.
  • Restrained shrinkage/expansion: NPD.
  • Carbonation resistance: NPD.
  • Modulus of Elasticity: NPD.
  • Temperature change resistance: NPD.
  • Grip: NPD.
  • Coefficient of thermal expansion: NPD.
  • Capillary water uptake: NPD.
  • Reaction to fire: NPD.

Sustainability data

Country of product manufacture

Germany

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
 -

1

IFC
 -

1

Similar products from Delta Membrane Systems Ltd

Koster Repair Mortar Plus

Koster Repair Mortar Plus

© 2024 NBS Enterprises Ltd. All rights reserved.