NBS Source
List your products
Description

Features:

  • Mineral coating containing crystallizing and capillary-plugging agents.
  • Excellent resistance to pressure, abrasion and chemicals.
  • Highly effective waterproofing with bituminous building materials.

Usage:

  • Waterproofing against ground moisture, non-pressurized and pressurized water.
  • New building and in the repair for horizontal and vertical waterproofing of concrete, masonry or cementitious plaster in wet rooms, bathrooms, showers, new-built basements, tanks, silos, sewage treatment plants, manholes, drinking water tanks, etc.
  • Application should only be carried out on substrates that are free from moving cracks.

Primer:

- Köster Polysil® TG 500:

Recommended for use on highly and normally absorbent and dusty or salt-damaged substrates.

Mixing:

  • Negative side waterproofing: Mix with water.
  • Positive side waterproofing: Mix with recommended additive.

General information
Color

Grey

Features

Mineral coating containing crystallizing and capillary-plugging agents, Excellent resistance to pressure, abrasion and chemicals, Highly effective waterproofing with bituminous building materials

Uniclass 2015
Crystallization active slurry mortars (Pr_20_31_53_18)Primary
Specification data - Crystallization active slurry mortars
Product Reference

Köster NB 1 Grey Slurry

Additive

Not required

Köster NB 1 Flex

Köster SB-Bonding Emulsion

Standard product features

Coating system (minimum):

Two coats.

Consumption:

  • Positive side waterproofing: 1.5 kg/m² (minimum, one coat); 4 kg/m² (maximum, 2–3 coats).
  • Negative side waterproofing: 3 kg/ m² (two coats).
  • Combined system-waterproofing with bituminous building materials: 1.5 kg/m² (one coat).

Density of fresh mortar:

1.85 kg/L.

Compressive strength:

  • After seven days: > 20 N/mm².
  • After 28 days: > 35 N/mm².

Flexural strength:

  • After seven days: > 4.5 N/mm².
  • After 28 days: > 5.5 N/mm².

Adhesive tensile strength:

> 4.5 N/mm².

Waterproof against pressurized water:

< 13 bar.

Curing:

  • Resistance to foot traffic: After two days (approximately).
  • Full cure: After 14 days (approximately).

Product Options

Additive:

- Köster NB 1 Flex:

  • A latex based dispersion which is intended as a mixing liquid for Köster NB sealing slurries.
  • It has an elastifying effect, improves the adhesion to the substrate and prevents the premature drying out of the fresh slurry.

- Köster SB-Bonding Emulsion:

  • Added to the mixing water to raise the ability of the waterproofing system to retain water.
  • Prevents, in cases of unfavourable weather conditions (warm, dry, drought), a premature curing of the coating.
  • Introduces flexibility to the material.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2016 2 2.0
IFC
- 1 2.0
Download now from NBS National BIM Library
Similar products from Delta Membrane Systems Ltd