Name: Knauf Performer: PC-70-055-6-1-15-SSP-25
Brand: Knauf UK
SKU: hgxcShKaq28jbUzD6DF4Su

Material

Gypsum

Metal

Glass mineral wool

Stone wool

Shape

Rectangle

Other

Square

Width

Bespoke

Height

Bespoke

Uniclass

Ss_25_10_30_35 Gypsum board partition systemsPrimary

CAWS

K10/30 Metal stud

K10/125 Metal stud partition system

Framing

Knauf 70 'C' (0.55) at 600 mm centres to suit maximum height.
Head channel: Knauf 72 'U' Channel (0.55).
Floor channel: Knauf 72 'U' Channel (0.55).

Insulation

25 mm Knauf Insulation Acoustic Roll.

Linings

1 x 15 mm Knauf Soundshield Plus to each side.

Fasteners

25 mm Knauf Performance Plus screws.

Joint treatment

Horizontal joint: Knauf Flat Fixing Plate.

Finish

System must be taped and jointed using Knauf Joint Filler (Premium) or Knauf Joint Cement Premium and Knauf Joint Tape (Paper). Or alternative Knauf jointing compounds manufactured to EN 13963.
Knauf Wallboard Primer applied once taping and jointing completed.
Prior to where paint decoration is required. For preparation for decoration of where gypsum plaster skim is required, the outer layer of plasterboard joints is required to be taped and filled, using Knauf Joint Filler (Premium) and Knauf Joint Tape (Paper) meeting quality level 1 in accordance with Eurogypsum - Drywall Jointing & Finishing - Surface quality level classification.
For application where gypsum skim finish is required, the Knauf system is to be taped and filled using Knauf jointing compounds.

Execution

Consult manufacturer's literature at
https://www.knauf.co.uk/our-services/resources

Deflection head

N/A.

Manufacturer guidance

The fire resistance performance of the system is based on tested solutions using deflection head construction.

Fire resistance

EI 60 tested in accordance with BS EN 1364-1.

Sound insulation

47 dB (Rw) when tested to BS EN 10140-2.

Duty rating (to BS 5234-2)

Severe Duty in accordance with BS 5234-2, clause 1.6.2 & 1.6.3 of Annex B & C.

System code

EN-PC-70-055-6-1-15-SSP-25.

Guidance for specification option:

The maximum height stated (see Partition height) is for the fire resistance of the system to meet project requirements where EN compliance is required. The stated maximum height figure is the lower value between the cold state height, calculated structurally to a limiting deflection of L/240 @ 200 Pa and the fire state height, as outlined in accordance with EN 1364-1 and EN 15254-3.

BS-PC-70-055-6-1-15-SSP-25.

Guidance for specification option:

The maximum height stated (see Partition height) is for the fire resistance of the system to meet project requirements where BS compliance (BS 476-22), is required and is accepted by the client, designers and building control. The stated maximum height figure is based on the maximum cold state height, calculated structurally to a limiting deflection of L/240 @ 200 Pa.

Partition height

Manufacturer guidance

Insert requirements, maximum 4000 mm.

See System code for further details.

Partition thickness

102 mm.

Manufacturer guidance

Excluding finishes.

Country of material origin

Spain

Manufacturer guidance

Applies to our natural gypsum only which is the main component of plasterboard. Other components are from other countries. Please contact Knauf for more details.

Country of product manufacture

United Kingdom

Manufacturer guidance

UK applies to the majority of manufacture but a small percentage of finished items may be imported. Please contact Knauf for more details.

Material

Gypsum

Metal

Glass mineral wool

Stone wool

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

Manufacturer guidance

Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1

Recyclability

Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

11.9 %

Manufacturer guidance

(2023 average by mass for all UK produced plasterboards, recycled gypsum & paper)

Material	Gypsum Metal Glass mineral wool Stone wool
Shape	Rectangle Other Square
Width	Bespoke
Height	Bespoke

Deflection head	N/A. Manufacturer guidance The fire resistance performance of the system is based on tested solutions using deflection head construction.
Fire resistance	EI 60 tested in accordance with BS EN 1364-1.
Sound insulation	47 dB (Rw) when tested to BS EN 10140-2.
Duty rating (to BS 5234-2)	Severe Duty in accordance with BS 5234-2, clause 1.6.2 & 1.6.3 of Annex B & C.
System code	EN-PC-70-055-6-1-15-SSP-25. Guidance for specification option: The maximum height stated (see Partition height) is for the fire resistance of the system to meet project requirements where EN compliance is required. The stated maximum height figure is the lower value between the cold state height, calculated structurally to a limiting deflection of L/240 @ 200 Pa and the fire state height, as outlined in accordance with EN 1364-1 and EN 15254-3. BS-PC-70-055-6-1-15-SSP-25. Guidance for specification option: The maximum height stated (see Partition height) is for the fire resistance of the system to meet project requirements where BS compliance (BS 476-22), is required and is accepted by the client, designers and building control. The stated maximum height figure is based on the maximum cold state height, calculated structurally to a limiting deflection of L/240 @ 200 Pa.
Partition height	- Manufacturer guidance Insert requirements, maximum 4000 mm. See System code for further details.
Partition thickness	102 mm. Manufacturer guidance Excluding finishes.

Country of material origin	Spain Manufacturer guidance Applies to our natural gypsum only which is the main component of plasterboard. Other components are from other countries. Please contact Knauf for more details.
Country of product manufacture	United Kingdom Manufacturer guidance UK applies to the majority of manufacture but a small percentage of finished items may be imported. Please contact Knauf for more details.
Material	Gypsum Metal Glass mineral wool Stone wool
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	- Manufacturer guidance Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1
Recyclability	Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1
Recycled content As defined in clause 7.8 of BS EN ISO 14021	11.9 % Manufacturer guidance (2023 average by mass for all UK produced plasterboards, recycled gypsum & paper)

Knauf Performer: PC-70-055-6-1-15-SSP-25

Application

Description

General information

Material

Shape

Width

Height

Uniclass

CAWS

Product range

Specification data - Gypsum board partition systems

Framing

Knauf 70 'C' (0.55) at 600 mm centres to suit maximum height.Head channel: Knauf 72 'U' Channel (0.55).Floor channel: Knauf 72 'U' Channel (0.55).

Insulation

25 mm Knauf Insulation Acoustic Roll.

Linings

1 x 15 mm Knauf Soundshield Plus to each side.

Fasteners

25 mm Knauf Performance Plus screws.

Joint treatment

Horizontal joint: Knauf Flat Fixing Plate.

Finish

Execution

Consult manufacturer's literature at https://www.knauf.co.uk/our-services/resources

Deflection head

Manufacturer guidance

Fire resistance

Sound insulation

Duty rating (to BS 5234-2)

System code

Partition height

Manufacturer guidance

Partition thickness

Manufacturer guidance

Sustainability data

Country of material origin

Manufacturer guidance

Country of product manufacture

Manufacturer guidance

Material

Embodied carbon

Manufacturer guidance

Recyclability

Recycled content

Manufacturer guidance

Third party certifications

Third party certifications

Literature

Knauf 70 'C' (0.55) at 600 mm centres to suit maximum height.
Head channel: Knauf 72 'U' Channel (0.55).
Floor channel: Knauf 72 'U' Channel (0.55).

Consult manufacturer's literature at
https://www.knauf.co.uk/our-services/resources