Name: Knauf Performer: PC-50-055-6-1-12.5-SSP-25
Brand: Knauf UK
SKU: gFKPnzcX7NFPSpRFhijfoN

Material

Gypsum

Metal

Glass mineral wool

Shape

Rectangle

Other

Square

Width

Bespoke

Height

Bespoke

Uniclass

Ss_25_10_30_35 Gypsum board partition systemsPrimary

CAWS

K10/30 Metal stud

K10/125 Metal stud partition system

Framing

Knauf 50 'C' (0.55) at 600 mm centres to suit maximum height.
Head channel: Knauf 52 Deep Flange 'U' Channel (0.70) (70 mm deep flange).
Floor channel: Knauf 52 'U' Channel (0.55).

Insulation

25 mm Knauf Insulation Acoustic Roll.

Linings

1 x 12.5 mm Knauf Soundshield Plus to each side.

Fasteners

25 mm Knauf Performance Plus screws.

Joint treatment

Horizontal joint: Knauf Flat Fixing Plate.

Finish

For paint finishes: System must be taped and jointed using Knauf Joint Filler (Premium) or Knauf Joint Cement Premium and Knauf Joint Tape (Paper). Or alternative Knauf jointing compounds manufactured to EN 13963.
Knauf Wallboard Primer applied once taping and jointing completed.
Prior to where paint decoration is required. For preparation for decoration of where gypsum plaster skim is required, the outer layer of plasterboard joints is required to be taped and filled, using Knauf Joint Filler (Premium) and Knauf Joint Tape (Paper) meeting quality level 1 in accordance with Eurogypsum - Drywall Jointing & Finishing - Surface quality level classification.
For application where gypsum skim finish is required, the Knauf system is to be taped and filled using Knauf jointing compounds. When using Knauf Performance Plus, the applicator of gypsum skim finish is required to check if pre-treatment is required.

Execution

Consult manufacturer's literature at
https://www.knauf.co.uk/our-services/resources

Deflection head

For deflection head allowance of up to -25 mm or ±12.5 mm, use 2 x 19 mm Knauf Coreboard fillets.

Fire resistance

N/A.

Sound insulation

44 dB (Rw) when tested to BS EN 10140-2.

Duty rating (to BS 5234-2)

Heavy Duty in accordance with BS 5234-2, clause 1.6.2 & 1.6.3 of Annex B & C.

System code

EN-PC-50-055-6-1-12.5-SSP-25.

Guidance for specification option:

The maximum height stated under Partition height (see below) is the cold state height, calculated structurally to limiting deflection of L/240 @ 200 Pa.

BS-PC-50-055-6-1-12.5-SSP-25.

Guidance for specification option:

The maximum height stated under Partition height (see below) is the cold state height, calculated structurally to limiting deflection of L/240 @ 200 Pa.

Partition height

Manufacturer guidance

Insert requirements, maximum 3000 mm.

See System code for further details.

Partition thickness

77 mm.

Manufacturer guidance

Excluding finishes.

Country of material origin

Spain

Manufacturer guidance

Applies to our natural gypsum only which is the main component of plasterboard. Other components are from other countries. Please contact Knauf for more details.

Country of product manufacture

United Kingdom

Manufacturer guidance

UK applies to the majority of manufacture but a small percentage of finished items may be imported. Please contact Knauf for more details.

Material

Gypsum

Metal

Glass mineral wool

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

Manufacturer guidance

Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1

Recyclability

Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-2

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

11.9 %

Manufacturer guidance

(2023 average by mass for all UK produced plasterboards, recycled gypsum & paper)

Material	Gypsum Metal Glass mineral wool
Shape	Rectangle Other Square
Width	Bespoke
Height	Bespoke

Country of material origin	Spain Manufacturer guidance Applies to our natural gypsum only which is the main component of plasterboard. Other components are from other countries. Please contact Knauf for more details.
Country of product manufacture	United Kingdom Manufacturer guidance UK applies to the majority of manufacture but a small percentage of finished items may be imported. Please contact Knauf for more details.
Material	Gypsum Metal Glass mineral wool
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	- Manufacturer guidance Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1
Recyclability	Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-2
Recycled content As defined in clause 7.8 of BS EN ISO 14021	11.9 % Manufacturer guidance (2023 average by mass for all UK produced plasterboards, recycled gypsum & paper)

Knauf Performer: PC-50-055-6-1-12.5-SSP-25

Application

Description

General information

Material

Shape

Width

Height

Uniclass

CAWS

Specification data - Gypsum board partition systems

Framing

Knauf 50 'C' (0.55) at 600 mm centres to suit maximum height.Head channel: Knauf 52 Deep Flange 'U' Channel (0.70) (70 mm deep flange).Floor channel: Knauf 52 'U' Channel (0.55).

Insulation

25 mm Knauf Insulation Acoustic Roll.

Linings

1 x 12.5 mm Knauf Soundshield Plus to each side.

Fasteners

25 mm Knauf Performance Plus screws.

Joint treatment

Horizontal joint: Knauf Flat Fixing Plate.

Finish

Execution

Consult manufacturer's literature at https://www.knauf.co.uk/our-services/resources

Deflection head

Fire resistance

Sound insulation

Duty rating (to BS 5234-2)

System code

Partition height

Manufacturer guidance

Partition thickness

Manufacturer guidance

Sustainability data

Country of material origin

Manufacturer guidance

Country of product manufacture

Manufacturer guidance

Material

Embodied carbon

Manufacturer guidance

Recyclability

Recycled content

Manufacturer guidance

Third party certifications

Third party certifications

Literature

Knauf 50 'C' (0.55) at 600 mm centres to suit maximum height.
Head channel: Knauf 52 Deep Flange 'U' Channel (0.70) (70 mm deep flange).
Floor channel: Knauf 52 'U' Channel (0.55).

Consult manufacturer's literature at
https://www.knauf.co.uk/our-services/resources