Verified by manufacturer 3 days ago
With deflection head arrangement
Knauf Independent ‘I’ Stud (non-fire resistance performance systems) is a fully independent wall lining system that can be used in all building types to upgrade the acoustic and thermal performance.
Fully independent wall lining system that can be used in all building types to upgrade the acoustic and thermal performance of an existing masonry wall and to deal with any irregularities.
Knauf Independent ‘I’ Stud (non-fire resistance performance systems) is a fully independent wall lining system that can be used in all building types to upgrade the acoustic and thermal performance of an existing masonry wall and to deal with any irregularities.
Due do the system using an Knauf ‘I’ Stud, there is no requirement for the lining system to be fixed back into the structure behind.
Material | Gypsum Metal Glass mineral wool |
Shape | Rectangle Other Square |
Width | Bespoke |
Height | Bespoke |
Material | Gypsum Metal Glass mineral wool |
Uniclass | |
CAWS | K10/30 Metal stud K10/125 Metal stud partition system |
Product range |
Framing | Knauf 60 'I' (0.70) at 600 mm centres to suit maximum height. |
Insulation | 50 mm Knauf Insulation Acoustic Roll. |
Linings | 2 x 15 mm Knauf Moisture Panel to room side. |
Fasteners | Inner layer: 25 mm Knauf Drywall screws – Jackpoint self drilling. |
Joint treatment | Horizontal joint: Knauf Flat Fixing Plate (to be applied behind outer layer plasterboard). |
Finish | System must be taped and jointed using Knauf Joint Filler (Premium) or Knauf Joint Cement Premium and Knauf Joint Tape (Paper). Or alternative Knauf jointing compounds manufactured to EN 13963. |
Execution | Consult manufacturer's literature at |
Deflection head | For deflection head allowance of up to -25 mm or ±12.5 mm: use 2 x 19 mm Knauf Coreboard fillets. |
Fire resistance | N/A. |
Sound insulation | N/A. |
Duty rating (to BS 5234-2) | Severe Duty in accordance with BS 5234-2, clause 1.6.2 & 1.6.3 of Annex B & C. |
System code | ISL-I-60-070-6-2-15-MP-50. Manufacturer guidanceThe maximum height stated (see Partition height) is the cold state height of the systems, calculated structurally to limiting deflection of L/240 @ 200 Pa. |
Partition height | Manufacturer guidanceInsert requirements, maximum 3600 mm. See System code for further details. |
Partition thickness | 92 mm. Manufacturer guidanceExcluding finishes. |
Material | Gypsum Metal Glass mineral wool |
Knauf Moisture Panel Data Sheet
Knauf Core Board Data Sheet
Knauf DF U Channel Data Sheet
Knauf Intumescent and Acoustic Mastic Data Sheet
Knauf U Channel Data Sheet
Knauf Jackpoint Screws Data Sheet
Knauf I Stud Data Sheet
Knauf Flat Fixing Plate Data Sheet
Knauf Wafer Head Self Tapping Screw Data Sheet
Knauf Fill and Finish Light Data Sheet
Knauf Paper Joint Tape Data Sheet
Knauf Insulation Acoustic Roll Data Sheet
Knauf 'I' Stud Lining (fire resistance system): ISL-I-92-090-6-2x15-FP-50
Knauf 'I' Stud Lining (non-fire resistance system): ISL-I-50-055-6-1-12.5-MP-0
Knauf 'I' Stud Lining (non-fire resistance system): ISL-I-50-055-6-1-12.5-WB-0
Knauf 'I' Stud Lining (non-fire resistance system): ISL-I-50-055-6-2-12.5-WB-25
Knauf 'I' Stud Lining (non-fire resistance system): ISL-I-50-055-6-2-15-SSP-25
Knauf 'I' Stud Lining (non-fire resistance system): ISL-I-50-055-6-2-15-SSP-50
Knauf 'I' Stud Lining (non-fire resistance system): ISL-I-50-055-6-2-15-WB-25
Knauf 'I' Stud Lining (non-fire resistance system): ISL-I-60-070-6-2-15-SSP-50
Knauf Hybrid Isolator: IC-70-055-4-2x15-SSP-2x15-PP-2x25(229/90)
Knauf Hybrid Isolator: IC-70-055-6-2x15-SSP-2x15-PP-2x25(229/90)