Compare

Knauf AQUAPANEL® Interior System: PAC-70-060-6-1-12.5-AQP-25

Name: Knauf AQUAPANEL® Interior System: PAC-70-060-6-1-12.5-AQP-25
Brand: Knauf UK
SKU: n2SKa7RbruTjpXcrHtR3WP

Verified by manufacturer 2 months ago

With deflection head arrangement

Knauf UK

Third party certifications:

EPD
Certificate type

Cement board for provision of a solid tile backing substrate for wet indoor areas such as swimming pools, leisure centres, bathrooms and kitchens.

Jump to:

0800 521 050 Website

Application

Provision of a solid tile backing substrate for wet indoor areas such as swimming pools, leisure centres, bathrooms and kitchens.

Description

Knauf AQUAPANEL® Cement Board Indoor is exceptionally tough and durable, providing a solid tile backing substrate for wet indoor areas such as swimming pools, leisure centres, bathrooms and kitchens.

The board is used in conjunction with specialist screws and finishing products to provide a full Knauf solution for humid and wet conditions.

General information

Material	Metal Glass mineral wool Cement
Shape	Rectangle Square Other
Width	Bespoke
Height	Bespoke

Uniclass	Ss_25_10_30_70 Rigid sheet partition systemsPrimary Ss_25_45_88_40 Internal wall tiling systems Ss_25_25_45_70 Rigid sheet wall lining systems
CAWS	K10/30 Metal stud K10/125 Metal stud partition system K10/35 Wall lining system (metal framing) K10/165 Wall lining system (metal framing)

Product range	AQUAPANEL® / AQUAPANEL® Interior System

Specification data - Rigid sheet partition systems

Framing	Knauf Acoustic 70 'C' (0.60) at 600 mm centres to suit maximum height. Head channel: Knauf 72 Deep Flange 'U' Channel (0.70) (70 mm deep flange). Floor channel: Knauf 72 'U' Channel (0.55).
Insulation	25 mm Knauf Insulation Acoustic Roll.
Linings	1 x 12.5 mm Knauf AQUAPANEL® Indoor to each side.
Fasteners	Knauf 4.2Ø x 25 mm AQUAPANEL® Maxi screws. (SN).
Joint treatment	N/A.
Execution	Consult manufacturer's literature at https://www.knauf.co.uk/our-services/resources

System finish	- Manufacturer guidance Insert requirements. Method used where desired finish is either skim coat or for tiling. Also, for fire resistance systems ONLY. Knauf AQUAPANEL® Tape applied over joints finished with Knauf AQUAPANEL® Joint Filler and Skim Coating – White. Apply also over screw heads (outer layer board). Note: Allow 3-5 mm gap between Knauf AQUAPANEL® Cement Board Indoor.
System code	EN-PAC-70-060-6-1-12.5-AQP-25. BS-PAC-70-060-6-1-12.5-AQP-25. Manufacturer guidance The maximum height stated is the lower value between the cold state height, calculated structurally to a limiting deflection of L/500 @ 200 Pa and the fire state height, as outlined in accordance within BS EN 1364-1 and BS EN 15254-3. See also System height.
System height	- Manufacturer guidance Insert requirements, maximum 3000 mm. See System code for further details.
System thickness	97 mm.
Fire resistance	EI 30 tested in accordance with BS EN 1364-1.
Deflection head	For deflection head allowance of up to -25 mm or ±12.5 mm: use 3 x 12.5 mm Knauf AQUAPANEL® Indoor Cement board fillets. Guidance for specification option: The fire resistance performance of the system is based on tested solutions using deflection head construction.