Klargester AquaOil Bypass MDPE & Full Retention GRP Separator - Fuel and Oil Separator
Verified by manufacturer over a year ago
NSBP003
NSBP003
A bypass separator for projects where it is considered an acceptable risk to not provide full treatment for very high flows.
Application
- Garage forecourts
- Car parks
- Workshops
- Supermarkets/shopping centres
- Distribution warehouses
- Car wash bays
- Scrap yards
- Car garages
- Fuel storage sites
- Distribution/haulage centres
- Waste transfer sites
- Business/commercial parks/industrial estates
Description
Kingspan Klargester bypass separators have been designed for use in projects where it is considered an acceptable risk to not provide full treatment for very high flows, such as, where the risk of a large spillage and heavy rainfall occurs at the same time is small.
Bypass separators fully treat all flows generated by rainfall rates of up to 6.5 mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator.
Typical bypass interceptor applications include surface car parks, roadways and lightly contaminated commercial areas.
Features and benefits:
- Engineered to achieve a concentration of less than 5 mg per litre.
- Treats the ‘first flush’, which is approximately 10% of the peak flow.
- Can be maintained from ground level.
- Light and easy to install, saving you time and money.
- Affordable service and maintenance plans are available.
- GRP or rotomoulded construction (subject to model).
- Inclusive of silt storage volume.
- Fitted inlet/outlet connectors and vent points within necks.
- Extension access shafts for deep inverts.
- CE-marked.
- SmartServ Pro remote monitoring solution available for added peace of mind.
General information
Color | Cream |
Material | Medium density polyethylene (MDPE) Glass Reinforced Plastic (GRP) |
Shape | Other |
Length | 1700 mm 2072 mm 2950 mm 3896 mm 3576 mm |
Width | 1350 mm 1220 mm 1420 mm 1920 mm |
Warranty description | Three year Guidance for specification option: Three year warranty when registered online and must be serviced by a Kingspan engineer or accredited service partner. Other terms and conditions apply, consult manufacturer. |
Uniclass | |
CAWS | R12/421 Oil and petrol separator units – plastics |
Specification data - Oil and petrol separators
Standard | To BS EN 858-1. |
Certification | CE marked. |
Separator type | Bypass. |
Class | To BS EN 858-1 Class l. |
Nominal size | NS 30. |
Connections | |
Inlet | 315 mm diameter. |
Outlet | 315 mm diameter. |
Vent pipes | Manufacturer guidanceWithin necks. |
Integral accessories | Fitted inlet/outlet connectors and vent points within necks. |
Accessories | Not required. SmartServ Pro remote monitoring solution. Guidance for specification option: Optional extra. |
Capacity | Silt: 300 L; Oil: 45 L. |
Literature
Klargester Aquacore Sustainable Drainage Systems Brochure
NSBE 010-125 Class 1 Bypass Separators
DS0560P-02 - Separator Bypass Flow Route
DS0561P-01 - Separator Normal Flow Route
DS0561P-02 - Separator Normal Flow Route
DS0848P-04 NSFA010-015 Full Retention Separators
DS0896P-04 NSFA080-285 Full Retention Separators
Similar products from Kingspan Klargester
Klargester AquaOil Forecourt Separator - Fuel and Oil Separator
Klargester AquaOil Full Retention MDPE & Full retention GRP Separator - Fuel and Oil Separator