KI 7 Plaster System

KI 7 Plaster System

Fassa UK Ltd Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type

Fibre-reinforced lime and cement multi-purpose base coat plaster.

Jump to:
+44 (0)1684 218305 www.fassabortolo.com

Application

Used as a foundation plaster on the following:

  • Bricks and honeycombed bricks.
  • Concrete blocks and rough concrete.
  • Expanded clay.
  • Mineral-based wall coverings.
  • IP 10 finishing plaster of 1 mm, 2 mm and 3 mm gradings.

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

Description

Fibre-reinforced lime and cement multi-purpose base coat plaster. Composed of Portland cement, graded sands, water repellent material, polymer fibres and specific additives.

Features and benefits:

  • Good workability and adhesion.
  • Water-repellent qualities for interiors and exteriors.
  • Maintains permeability to water vapour.
  • Low shrinkage.
  • Highly durable.
  • Helps to provide dry walls and consequently better heat insulation.
  • Greater dimensional stability and lesser tendency for cracks to form.
  • Less rising damp due to capillary action.
  • Applicable by hand or machine (e.g. FASSA, PFT, PUTZKNECHT, PUTZMEISTER, TURBOSOL) – consult manufacturer for details.
  • CE marked, and manufactured in accordance with EN 998-1.

Applications:

Used as a foundation plaster on the following:

  • Bricks and honeycombed bricks.
  • Concrete blocks and rough concrete.
  • Expanded clay.
  • Mineral-based wall coverings.
  • IP 10 finishing plaster of 1 mm, 2 mm and 3 mm gradings.

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

General information

Uniclass 2015

Pr_35_31_64_47 Lime plastersPrimary

CAWS

M20/10 Cement:lime:sand

M20/110 Cement:lime:sand

M20/240 One coat proprietary plaster

M20/47 One coat proprietary plaster

Product range

Plastering and rendering

Specification data - Lime plasters

Product Reference

KI 7 Plaster System

Standard product features

Technical characteristics:

  • Specific weight: 1400 kg/m³ (approximately).
  • Minimum thickness: 10 mm.
  • Grading: <1.5 mm.
  • Mixing water required: 23% (approximately).
  • Yield: 12.8 kg/m² (approximately, for 10 mm thickness).
  • Shrinkage: 0.04 mm/m (approximately).
  • Density of hardened plaster: 1530 kg/m³ (approximately).
  • Flexural strength (after 28 days): 1 N/mm² (approximately).
  • Compressive strength (after 28 days): 2.5 N/mm².
  • Elasticity module (after 28 days): 3000 N/mm² (approximately).
  • Water vapour diffusion resistance factor (to EN 1015-19): µ = 14 (approximate measured value).
  • Capillary water absorption coefficient (to EN 1015-18): W1.
  • Thermal conductivity coefficient (to EN 1745): λ = 0.55 W/m∙K.
  • Compressive strength (after 25 freeze-thaw cycles): 3.5 N/mm² (approximately).
  • Conformity (to EN 998-1): GP-CSII-W1.

Literature

Fassa Bortolo Plaster & Render System

Fassa Bortolo Plaster & Render System

Third party certifications

  • Emissions Dans L'air Interieur: Certificate: A+
  • DoP: Certificate: 420-CPR-14-07