NBS Source
List your products
KH215/110
Application

Suitable for internal food, beverage and pharmaceutical factory drainage and external civil drainage projects. Heelproof gratings it is suitable also for civil projects.

Description

The KH215/110 Gully is the side outlet version of the KV215 Gully.

Foul air traps:

The bottom outlet gullies use a bell trap (also referred to a dome or mushroom). A 65 mm water seal is created (complies with EN 1253). This grips firmly to an upstand which is an integral part of the gully body. It is easily removable giving clear access for rodding and cleaning. Chains can be attached to traps to ensure they are not lost.

The side outlet gullies use a Weir Trap system. A 50 mm water seal is created (complies with EN 1253). This is a fully integral part of the gully body and contains a removable bung for easy rodding. In special circumstances a hinged self-sealing stainless bung can be provided.

Features and benefits:

  • Manufactured from grade 1.4301 (304) or 1.4401 (316) stainless steel to BS EN 10088.
  • Strong.
  • Meets the requirements of BS EN 1253 Loading Class L15/ R50/ M125/ N250/ P400. This gully can be subjected to very heavy loads but must have the correct heavy duty grating to achieve these loads.
  • Usable in both heavy and light duty areas.
  • Suitable for internal factory drainage and external civil drainage projects.
  • The KH215/110 standard gully accepts 10 mm thick gratings as well as 3 mm thick covers that are made to sit in a 10 mm recess (Perforated Gratings, Sealed Gratings).
  • The KH215/110DS (Deep Swage) version of this gully accepts all 25 mm deep gratings (Mesh, Heelproof Mesh, Factory Ladder, Heelproof Ladder).
  • In most cases a 110 or 160 mm outlet is required, but this can easily be substituted for a 4” or 6” SCH10 outlet pipe. It is trapped as standard with the Kent Weir Trap.

Applications:

Suitable for internal food, beverage and pharmaceutical factory drainage and external civil drainage projects. Heelproof gratings it is suitable also for civil projects.

General information
Material

1.4301 (304) stainless steel

1.4401 (316) stainless steel

Uniclass 2015
Pr_65_52_24_31 Floor gulliesPrimary
CAWS

R11/315 Floor drains

R11/5 Floor drains

Specification data - Floor gullies
Product Reference

Industrial Gully – Side Outlet

Type

KH215/110

KH215/110DS

KH315/110

KH315/110DS

KH315/160

KH315/160DS

Height

Manufacturer's standard

Bespoke

Insert requirements.

Material

1.4301 (304) stainless steel

1.4401 (316) stainless steel

Loading class to BS EN 1253

L15

R50

M125

N250

P400

Flange type

4” 150lb R/F S/O ANSI Flange

4” PN10 R/F S/O Flange

Damp proof membrane flange

Holding flange

Puddle flange

Side inlets -
Type

1½” BSP nipple

1½” BSP socket

50 mm push fit

Above ground funnel

Angle

45°

90°

Bespoke

See 'Options'. Consult manufacturer and insert requirements.

Grating

Extensive range of options available, see 'Options' and insert requirements.

Filter basket

Not required

Required

Required, with chain

Required, with separate filter basket

Accessories

None

Hinged self-sealing stainless bung

For foul air trap on a side out gulley.

Standard product features

Size (h x w x d):

  • KH215/110: 220 x 215 x 215 mm.
  • KH215/110DS: 235 x 215 x 215 mm.
  • KH315/110: 220 x 315 x 315 mm.
  • KH315/110DS: 235 x 315 x 315 mm.
  • KH315/160: 269 x 315 x 315 mm.
  • KH315/160DS: 284 x 315 x 315 mm.

Increased height body is used where a higher flow rate is needed. The gullies can be increased to customized heights. Consult manufacturer for details.

Outlet:

- 110 mm:

  • KH215/110.
  • KH215/110DS.
  • KH315/110.
  • KH315/110DS.

- 160 mm:

  • KH315/160.
  • KH315/160DS.

Swage:

- 10:

  • KH215/110.
  • KH315/110.
  • KH315/160.

- 25:

  • KH215/110DS.
  • KH315/110DS.
  • KH315/160DS.

Flow rate:

  • KH215/110: 4.42 L/s.
  • KH215/110DS: 4.75 L/s.
  • KH315/110: 4.42 L/s.
  • KH315/110DS:4.75 L/s.
  • KH315/160: 9.10 L/s.
  • KH315/160DS: 9.85 L/s.

Product Options

Flanges:

Base flanges are available with flange connections i.e. 4” / 6” / 8” ANSI B 16.5 or BS 4504 or to suit polypropylene flanges. Consult manufacturer for details.

Side inlets:

- Angle:

  • Side inlets can be 90 degrees to gully body, however, they can be welded at 45 degrees or a specific angle to suit a specific project.
  • Round Body gullies are most suitable for a higher number of side inlets at different angles.

Grating:

An extensive range of gratings are available, consult technical literature for details.

Filter basket:

Filter baskets can be incorporated into bell traps or separated for deeper gullies. For a higher flow rate a deeper gully with separate traps and filter baskets are used. The filter basket can also be chained to avoid loss.

Similar products from Kent Stainless