Kent Tactile Warning Strip

Application

For use in high-traffic pedestrian areas.

DDA regulations state that strips are to be placed at 50 mm centres running transversely across the direction of pedestrian travel - consult manufacturer for details.

Description

Warning strip for use on tactile paving.

Features and benefits:

  • Provides an underfoot warning to identify hazards, dangerous areas or instances where there is an unprotected opening such as open stairwells and platforms.
  • Slip-resistant, ridge-finish design makes the stud compatible for use in wet/ cold conditions.
  • Easy to install.
  • Provided with a satin finish 320 grit polish.
  • Can be incorporated into the full range of Kent Stainless seats and benches (specified separately). Consult manufacturer for details.
  • Will protrude 5 mm above ground level once installed.

Applications:

For use in high-traffic pedestrian areas.

DDA regulations state that strips are to be placed at 50 mm centres running transversely across the direction of pedestrian travel - consult manufacturer for details.

General information

Material

Stainless steel, grade 316L (1.4404)

Uniclass 2015

Pr_35_90_60_87 Tactile paving studsPrimary

CAWS

Q25/320 Tactile flags and slabs

Specification data - Tactile paving studs

Product Reference

Kent Tactile Warning Strip (KTWS-25/400)

Standard product features

Material:

Stainless steel, grade 316L (1.4404).

Size (l x w):

400 x 25 mm.

Similar products from Kent Stainless