Junior 80 GP (Sliding Door Hardware)

Door hardware with patch suspension, for use with all-glass single doors weighing up to 80 kg.

Features and benefits:

• Includes a glass attachment.
• Simple to install.
• The suspension is fitted from the interior.
• The countersunk suspension bolt permits a low installation height.
• It is easy to adjust the position of the glass sliding door, as the vertical adjustment can be carried out from the interior (door removal is not required).
• Compatible for use with sliding doors: Fully tempered monolithic glass (of 8, 10, 12 and 12.7 mm thickness) and fully tempered laminated glass (of 8.7–12.7 mm thickness), and fixed doors: Fully tempered monolithic or laminated glass (of 8–12 mm thickness, up to 13 mm with silicone).
• Further profiles allow fixed glass to be fitted without the hardware being visible.
• Smooth, quiet operation.
• Can be provided in a wall pocket configuration.

Running track:

• Supplied with integrated retainers for fixed glass.
• Glass element positioned in the track’s fixed glass retainer.
• A retainer profile for wall and floor fitting provides sufficient stability, whether flush or mounted.
• A rubber profile or silicone groove hold the glass in position and prevent humidity seeping between glass and track.
• Running track set with aluminium cover profile, which clips into and closes the fixed glass retainer in the walk-through area.

Components:

Quantities of each component will vary dependent on variant specified (consult manufacturer for details).

• Two-wheeled trolley M10, with plastic wheels.
• Suspension bolt M10 and mounting screws.
• Patch suspension with glass holder insert.
• Track stop with adjustable retaining force.
• Single use drilling jig.
• Screw-on rubber door stop.
• Vertical adjustment pin.
• Soft closing mechanism (23091– one and 23092 – two only).
• For two-panel sliding doors.
• Order two sets for single doors.
• Consult manufacturer for further details.