Jesmonite - Stone Exterior Moulding
Verified by manufacturer 8 days ago
Lightweight and sustainable stone exterior moulding.
Application
Can be used in a variety of environments and applications alike, including, but not limited to:
- Cladding Panels.
- Decorative external features.
- Laminated casts.
- Glass reinforced solid casts.
- Internal features and homewares.
- Non-load bearing applications.
- High detail artworks and sculptures.
Description
Jesmonite, is a compound of finely ground real stone backed by an acrylic resin that seamlessly replicates solid stone in any colour, texture or effect. It is used in a wide range of applications in the construction, architectural and art industries.
Features and benefits:
- Highly versatile, durable and lightweight material.
- Weather resistant.
- Long-lasting.
- Sustainable.
- Lightweight and easy to cast.
- Rapid curing and high early strength gain.
- Gives resistance to water, fire and discolouration.
- Water-based and solvent free - no VOCs.
- Produces less harmful dust than real stone.
- Good abrasion resistance and impact strength.
- High compressive and tensile strength.
General information
Color | Beige Cream Grey Orange Red |
Finish | Smooth Roughcast Other |
Material | Composite |
Shape | Formless |
Uniclass | |
CAWS | M20/685 Solid cast plaster |
Specification data - Solid cast plaster mouldings
Cornice | |
Moulding type | Manufacturer guidanceInsert requirements or omit. |
Size | Manufacturer guidanceInsert requirements or omit. |
Centrepiece | |
Moulding type | Manufacturer guidanceInsert requirements or omit. |
Size | Manufacturer guidanceInsert requirements or omit. |
Dado | |
Moulding type | Manufacturer guidanceInsert requirements or omit. |
Size | Manufacturer guidanceInsert requirements or omit. |
Colour | Bath stone. Natural. Charcoal black. Old terracotta. White marble. |
Fire classification | To EN 13501-1, A2-s1-d0 (non-combustible). |
Density | Wet density: 1950 kg/m³. |
Mix | 5:1 (base to liquids). |
Porosity | To BS EN 1170-6, 2.26%. |
Freeze-thaw resistance | 300 cycles. |
Dimensional stability | To BS EN 1170-7, 0.83 (shrinkage); 1.28 (expansion). |
Weathering | To BS EN ISO 4982, 1008 hours. |
Compressive stress (maximum) | To BS EN 12390-3, 58 Mpa (N/mm²). |
Flexural strength | To BS EN 1170-5, 8.9 Mpa (LOP); 23.6 Mpa (MOR). |
Sustainability data
Material | Composite |